<html>
<head>
<meta content="text/html; charset=UTF-8" http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
On 10/08/2011 9:04 PM, Euan de Kock wrote:
<blockquote cite="mid:1312981485.1638.34.camel@euan-bigamd"
type="cite">
<pre wrap="">Regarding the parts:
A:
The 3.5mm to 6.3 (1/4") cable will be used to feed our main output
channel to a PC sound card input. This will give us a true stereo input
- does our dvsink to file save in stereo ? (Would be nice).</pre>
</blockquote>
It saves the video as RAW DV, which I think is stereo @ 16 bit, 48
KHz. However, since we're using a mono radio mic, when we're
streaming we're downmixing to mono, and when we're encoding to x264
we're doing probably joint stereo (or mono again).<br>
<br>
<blockquote cite="mid:1312981485.1638.34.camel@euan-bigamd"
type="cite">
<pre wrap="">B:
I will knock up a PC interface cable (A:) this week as I have some spare
connectors/cable lying around. I also have two of the Jack converters
(B:) lying around, which will give us an input for the wireless Mic and
an output to a set of the 3.5mm headphones.
I also have a PCI-E Vid card, 9800 GeForce (512Mb RAM) with dual DVI
out, I'll bring it along to our next workshop to see if it flies.</pre>
</blockquote>
<br>
Cool. Thanks.<br>
<br>
<blockquote cite="mid:1312981485.1638.34.camel@euan-bigamd"
type="cite">
<pre wrap="">BTW, these are all donations to the av project. If anyone wants to get
their hands on this stuff earlier let me know and I'll arrange to meet
sometime somewhere.</pre>
</blockquote>
<br>
Well, perhaps I'll drag the kit along to the workshop on the 22nd?<br>
<br>
<blockquote cite="mid:1312981485.1638.34.camel@euan-bigamd"
type="cite">
<pre wrap="">James, at the most recent workshop, you where looking at configuring
some LED indicators - I think using the TALLY signal and an RS232 port.
Do all the necessary boxes have RS232 ports available ?</pre>
</blockquote>
I think so. We didn't get it working properly; dvswitch needs to
start with the "-t" flag to print the tally information, and then we
need to write a second script to capture that (form STDIN) and open
and close the serial port accordingly).<br>
<br>
<br>
James<br>
<br>
<br>
<div class="moz-signature">-- <br>
<em>Mobile:</em> +61 422 166 708, <em>Email:</em>
james_AT_rcpt.to<br>
PLUG President 2011: <a href="http//www.plug.org.au">http://www.plug.org.au</a></div>
</body>
</html>