No subject

[Kent Ian]

snip ...

>All three can be found at http://rufus.w3.org/linux/RPM/
>You need to install diald-0.16 first then diald-config-unmetered-0.2 and
>finally diald-config-1.2.1. This gives you all the config for a ppp0 setup.

Opps! that should be:
You need to install diald-0.16 first then diald-config-1.2.1 and
finally diald-config-unmetered-0.2.

There is also a diald-config-metered-0.2 which replaces the unmetered one with 
different timeout values.
snip ...


Ian Kent