[plug] 2 network cards

[Shackleton, Kevin]

That's it thanks.

Interestingly, using the DOS setup utility (lanset.exe for the UMC9003AF),
the second card (at 0x320) appears to use IRQ10, but after a modprobe it
uses IRQ9.  Hopefully it will work . .

K.

> ----------
> From: 	Richard Sharpe[SMTP:sharpe at ns.aus.com]
> Reply To: 	plug at plug.linux.org.au
> Sent: 	Sunday, 16 July 2000 20:02
> To: 	plug at plug.linux.org.au
> Subject: 	Re: [plug] 2 network cards
> 
> At 07:56 PM 7/16/00 +0800, you wrote:
> >If you have 2 network cards using the same module driver (ne.o in this
> >case), what's the syntax in /etc/conf.modules to set up the 2 cards?  Or
> >could someone say where the HOWTO/MINI/Multiple-Ethernet document is?
> 
> alias eth0 ne
> alias eth1 ne
> options ne io=0x300,0x340
> 
>