[PLUG] Several queries

[Len Bird]

Edwin Johnston wrote:

> I've installed Mandrake 7.1 and am having some problems.
>
> SOUND CARD.
> My sound card is CMI8330/C3D which is installed on the motherboard.
> Linux recognises the sound card but I cannot configure it. Windows PlugnPlay
> sees it as SB16 Audio Device and has the following settings:
> I/O Range 0220-022F
> I/R 09
> DMA 01
> DMA 07
>
> I've tried using Drakconf/Sounddrake 0.6.6 with the following settings:
> I/O    IRQ    DMA8   DMA16/2    MPU401 I/O
> 220     9       1       7          330
> but I get the following error messages when I try to test the soundcard:
> Error in modprobe call!
> /lib/modules/2.2.15-4mdk/misc/ad1848.0: invalid parameter parm_mpu_io
> /lib/modules/2.2.15-4mdk/misc/ad1848.0: insmod
> /lib/modules/2.2.15-4mdk/misc/ad1848.0: failed
> /lib/modules/2.2.15-4mdk/misc/ad1848.0: msmod ad1848 failed
>
> Can anyone please help as to what settings I should use?
>
> MODEM.
> I have an Actiontec Diamond Voice 56k external modem which is supposed to be
> Linux compatible (it says so on the box)????
> Drakconf/Harddrake 0.5.3 shows the following:
> Vendor    Unknown
> Model     V90/V.X2/V.34BO/V.34S/V.34/V.32B/FAX Class1/Fax
> Class2/MNP5/V.42bis
> Device    /dev/ttyS1   (It is located on COM2 in Windows)
> Bus Type  Serial
>
> Using kppp to query the modem returns:
> ATI  AEIGEX560LKTF1  ERROR
> ATI1 E794 ERROR
> ATI2 ERROR
> ATI3 AEIGEX560LKTF1  ERROR
> ATI4 17 ERROR
> ATI5 s051399V,0,19 ERROR
> ATI6 ERROR
> ATI7 ERROR
>
> Can someone please help?
>
> General query - how do you get to the command line prompt (i.e. completely
> out of Xwindows) when running an X windows session? I've tried Ctrl, Alt and
> Backspace but that only closes down the Xwindow session.
>
> Sorry for the length of this post.
> Edwin Johnston