[plug] 3d problem

[Christian Müller]

tried all that, did not help. I have basically flashed every single 
bios/firmware in my computer but to no avail. I'll have a go without the 
soundcard later tonight though.

Christian

At 19:13 27/12/2001 +0800, you wrote:
>Have you tried the usual Via/GF2 stuff like AGPx2 as a test or setting
>SideBand Addressing off by rebiosing the card?
>
>I know they sound odd, but I went through this for the first GF both on a
>BH6 and 300a combo and a p3v4x & 550 combo.
>Both are known boards that have problems with GF and above.
>
>(Ask a veteran tech about whether you should buy a p3v4x board and watch
>him cough, splutter, and start talking tongues - ie they suck with nVidia
>cards)
>
>Regards.
>
>Craig Foster
>
> > -----Original Message-----
> > From: Aaron Wooten [mailto:wootenaa at hotmail.com]
> > Sent: Thursday, 27 December 2001 12:05 PM
> > To: plug at plug.linux.org.au
> > Subject: [plug] 3d problem
> >
> >
> > Hi Guys
> > Sory this isnt a linux related question but this has been
> > bothering me for
> > months. The problem is that I have a geforce2 MX 400, and
> > when I play 3d
> > games such as quake3, hitman, unreal, .etc it locks up
> > halfway through
> > gameplay, Ive tried this with Winme and 2000. I originally
> > thought this
> > could be a cooling problem as the heatsink was quite small,
> > so I got a blue
> > orb, but alas it still crashes.I have all the updated
> > drivers for the card
> > and my Motherboard. Below is my system specs, If anyone has
> > anything that
> > could help it would be appreciated.
> >
> > Aopen AK33 Mobo
> > Palit Daytona Geforce 22 MX 400 w blue orb
> > 256mb PC133 SDRAM
> > Duron 950 w Coolermaster dp5-6h51
> > 250W psu
> > Pioneer DVD
> > Running Win2k SP2
> >
> > Thanks
> >
> > Aaron W
> >
> >
> >
> >