[plug] Help with routing

[Evan Lau]

Add IP routes as following on the linux router (don't know the syntax for
sure but I'll use Cisco IOS syntax):

ip route *.*.*.0 0.0.0.255 *.*.*.?
			   ^^^^^^ = IP address of ether switch

No guarantees *grinz* coz linux might do things differently.

Evan

On Thu, 22 Feb 2001, BaRT wrote:

> Hi,
> 
> I have a c class network, and linux router with 2 ethernet cards in it.
> 
> eth0 ip is *.*.*.254 and goes to a ether switch with the rest of the c class
> on it but one IP.
> 
> eth1 ip is *.*.*.253 with a cross over cable to one host *.*.*.252(same c
> class as above). I can get *.*.*.252 to ping the linux router and the rest
> of the internet, how do I make is so it can ping the rest of our c class.
> 
> Thank for help
> 
> BaRT
> 
>