[plug] Video card IRQs

[Brad Campbell]

Christian wrote:
> 
> On Wed, Jun 13, 2001 at 02:10:56PM +0800, Brad Campbell wrote:
> > Interrupts only show up there when they are being used actively by a driver.
> > Take the /dev/ttySx for example. You will only see an interrupt listed while
> > the device is open.
> > I find my vid card only listed when it is being used.
> > And, on this machine, I have never seen it used.
> 
> But it appears under /proc/pci right?  And in your BIOS information on
> boot (if provided at all)?

Yes, it is listed in both the BIOS and /proc/pci lists.
Have you tried resetting the ESCD data from the pnp menu in the bios?
The only other options are a Bios upgrade or vga firmware upgrade by the
sounds of it.
Umm.. Does your bios have an operating system setting?
My bios has a setting that allows me to select win95/win98/other.
If I select other, like I would assume I should, it does strange things
with the pci bus setup, and I can't get at my lucent winmodem correctly.
If I set it to win98, all works well..


-- 
Brad....
                   /"\
Save the Forests   \ /     ASCII RIBBON CAMPAIGN
Burn a Greenie.     X      AGAINST HTML MAIL
                   / \