[plug] mounting problem

[Jon Miller]

ver 2.2.16-22, I see in dmesg the cdroms are registered as:
ide_setup: hdc=ide-scsi
ide_setup: hdb=ide-scsi
hdb:Pioneer DVD-ROM ATAPI..... ATAPI CdROM Drive
hdc:4x4x30 ATAPI CDROM drive

in /etc/fstab
/dev/hdb  /mnt/cdrom  iso9660  user,noauto,ro  0 0
/dev/hdc  /mnt/cdrom2 iso9660  user,noauto,ro  0 0

Jon  

<<< adam_ashley at softhome.net  3/18 11:46a >>>
Which kernel version are you using? I had this problem with the 2.3 and 2.4
trees, in that if ide-cdrom is loaded or compiled in, then ide-scsi will not
work.

Adam

> -----Original Message-----
> From: Jon Miller [mailto:jlmiller at mmtnetworks.com.au]
> Sent: Monday, 19 March 2001 3:06 AM
> To: plug at plug.linux.org.au
> Subject: [plug] mounting problem
>
>
> I have 2 cdroms on my dual boot system.  1 is a cd writer and the
> other is a dvd/cdrom.
> Both units were installed using loadlin in a bat file from DOS
> (c:\linux\loadlin c:\linux\vmlinuz root=/dev/hda3 ro hdc=ide-scsi
> hdb=ide-scsi
>
> Yet when trying to access the either cdrom I can not as /dev/scd0
> or /dev/scd1 nor when creating a ln from either device to /dev/cdrom.
>
> Is there a way of cdreating this and having it available
> everytime I go into Linux (eg in the fstab)?
>
> Thanks
>