[plug] lm-sensors

[Bill Kenworthy]

Thanks to Jason I have got it working, interesting how much extra burn
seti gives!  Now its obvious I need some work in the heatsink department
...

By the way, I could not find what "SBr" (see temp below) is in the
manual, though its about the ambient room temp.


wdk at rattus ~ $ sensors
via686a-isa-6000
Adapter: ISA adapter
Algorithm: ISA algorithm
CPU core:  +1.80 V  (min =  +1.48 V, max =  +1.99 V)   
I/O:       +3.45 V  (min =  +3.26 V, max =  +3.54 V)   
+5V:       +4.88 V  (min =  +4.69 V, max =  +5.24 V)   
+12V:     +12.27 V  (min = +11.41 V, max = +12.46 V)   
CPU Fan:  4787 RPM  (min = 4687 RPM, div = 2)          
SYS Temp:  +31.7°C  (limit =  +45°C, hysteresis =  +40°C) 
CPU Temp:  +54.8°C  (limit =  +60°C, hysteresis =  +55°C) 
SBr Temp:  +23.0°C  (limit =  +65°C, hysteresis =  +60°C) 


BillK

On Mon, 2001-11-26 at 00:35, Adrian Woodley wrote:
> G'Day,
>         Cheers to Bill and Jason for bringing up lm-sensors. I saw that, 
> not knowing what it was and decided to go looking. Two or three hours 
> later I now have two pretty lines on my strip-chart applet showing me 
> that my CPU and Sys temporatures are sitting at a very steady 34.5deg C. 
> Totally pointless, but cool :) I was hoping for wild fluctuations :) Oh 
> well, time to start over-clocking ;)
> 
> Adrian
>