[plug] RH 7.2 no go

[Grahame Bowland]

On Thu, 2002-02-07 at 15:56, Patrick Tehvand wrote:
> Go into your BIOS and I'd suggest trying to change the addressing mode
> of you harddrive to LBA32. That ought to fix it, but you might need to
> boot off the cd and then run lilo again.
> 
> it was already set as that :(
> 
> also - when i run lilo as root it comess up with a 
> 
> Warning, hdb1 is not on first disk!
> *linux

Change the jumper on the hard drive to make it the master and ensure 
it's on the first IDE bus. If you're not confident doing this look at
using grub to boot (it's an option in Redhat 7.2 to use grub anyway.)

If you change the jumper make sure nothing else is master either!

-- 
Grahame Bowland                       Email: grahame at ucs.uwa.edu.au
University Communications Services    Phone: +61 8 9380 1175
The University of Western Australia     Fax: +61 8 9380 1109
                                     CRICOS: 00126G