[plug] getting telnet access

[Craig Reynolds]

I have got /etc/xinetd.d, but not the telnet file.

~~~~~~~~~~~~~
§ ©raig ®eynolds §
~~~~~~~~~~~~~
Just because this is never going to work is no reason to be negative!
----- Original Message -----
From: "Ben Jensz" <jensz at wn.com.au>
To: <plug at plug.linux.org.au>
Sent: Sunday, January 20, 2002 4:22 PM
Subject: RE: [plug] getting telnet access


Sorry, that should've been /etc/xinetd.d, if that dir isn't there, then
you're missing some packages you really need..


/ Ben

-----Original Message-----
From: Craig Reynolds [mailto:reynoldscraigr at hotmail.com]
Sent: Sunday, 20 January 2002 3:36 PM
To: plug at plug.linux.org.au
Subject: Re: [plug] getting telnet access


I dont appear to have /etc/xinet.d/telnet, nor the directory
/etc/xinet.d.

Should I create the telnet file in /etc/xinetd.d ?
~~~~~~~~~~~~~
§ ©raig ®eynolds §
~~~~~~~~~~~~~
Just because this is never going to work is no reason to be negative!
----- Original Message -----
From: "Ben Jensz" <jensz at wn.com.au>
To: <plug at plug.linux.org.au>
Sent: Sunday, January 20, 2002 3:25 PM
Subject: RE: [plug] getting telnet access


Have you told xinetd to run the telnet-server?

Because in 7.2 it isn't enabled as per default.. open the file
/etc/xinet.d/telnet with your favourite text editor and change the
appropriate line from disable to enable (you'll see it when you open
it).  Just killall -HUP xinetd and it should then listen on port 23 for
telnet then.


/ Ben

-----Original Message-----
From: Craig Reynolds [mailto:reynoldscraigr at hotmail.com]
Sent: Sunday, 20 January 2002 3:06 PM
To: plug at plug.linux.org.au
Subject: Re: [plug] getting telnet access


I had forgotten it actually, but the problem is still there, my
connection is refused.

~~~~~~~~~~~~~
§ ©raig ®eynolds §
~~~~~~~~~~~~~
Just because this is never going to work is no reason to be negative!
----- Original Message -----
From: "Kai" <vk6ksj at siwa.com.au>
To: <plug at plug.linux.org.au>
Sent: Sunday, January 20, 2002 3:12 PM
Subject: Re: [plug] getting telnet access


> I dunno if it's  typo but did you remember to include the : after
> telnetd? ie
> in.telnetd: 203.59.50.95/255.255.255.240
>
> ----- Original Message -----
> From: "Craig Reynolds" <reynoldscraigr at hotmail.com>
> To: <plug at plug.linux.org.au>
> Sent: Sunday, January 20, 2002 2:46 PM
> Subject: [plug] getting telnet access
>
>
> > Hi guys, I've got a fresh RH 7.2 install an I'm having trouble
> > getting telnet acces to it, so I was hoping someone would be able to

> > point me in
> the
> > right direction.
> >
> > As best I can tell it should work. I turned the firewall of during
> install,
> > and I have the IP range of the network I want to get at it from in
> > /etc/hosts.allow, as follows
> >
> > in.telnetd 203.59.50.95/255.255.255.240
> >
> > The problem that I am getting is that whenever I try to telnet in,
> > it
> tells
> > me that the connection has been refused. An I can ping the machine,
> > any ideas?
> >
> >
> > ~~~~~~~~~~~~~
> > § ©raig ®eynolds §
> > ~~~~~~~~~~~~~
> > Just because this is never going to work is no reason to be
> > negative!
> >
> >
>
>