[plug] re: routing issues

[Jon Miller]

I have a routing issue that I would like clarified.
Currently the route is:
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
192.168.5.0     0.0.0.0         255.255.255.0   U     0      0        0
eth0
192.168.2.0     0.0.0.0         255.255.255.0   U     0      0        0
eth1
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0
lo
0.0.0.0         192.168.2.1     0.0.0.0         UG    0      0        0
eth1

I trying to add a vpn connection to the office server.  This is done
using cipe with an ipaddr of 192.168.10.3 for the home and 192.168.10.1
for the office.

With the existing is 0.0.0.0  gw 192.168.2.1 eth1 should I replace it
with 0.0.0.0 gw 192.168.10.3.  The existing gw is going through a cisco
router.
If I replace this then I believe I would need a route to get to
192.168.10.0 network and this can be done by going through gw
192.168.5.1 (server ipaddr)

Can someone clarify this or is this correct?