[plug] bridge needed ...

[William Kenworthy]

yes, but this is already present and I cannot ping etc across the
route.  I have dropped the firewalls on each of the two mosix nodes, but
the central machine is externally firewalled, not internally (using a
monmotha script) - I will check this later.

BillK

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
iinet IP    0.0.0.0         255.255.255.255 UH    0      0        0 ppp0
192.168.2.0     0.0.0.0         255.255.255.0   U     0      0        0
eth1
192.168.0.0     0.0.0.0         255.255.255.0   U     0      0        0
eth0
192.168.76.0    0.0.0.0         255.255.255.0   U     0      0        0
vmnet8
0.0.0.0         iinet IP    0.0.0.0         UG    0      0        0 ppp0

On Tue, 2002-11-26 at 18:38, Brian Tombleson wrote:
> William Kenworthy wrote:
> > Hi, I am trying to set up a mosix cluster across two networks and need
> > to enable traffic to pass:
> > 
> > e.g.

> 
> Umm .. OTTOMH ..
> 
> On ppp as root or in a startup script:
> route add -net 192.168.0.0 nm 255.255.255.0 eth0
> route add -net 192.168.2.0 nm 255.255.255.0 eth1
> 
> (assuming eth0 and eth1 are the respective interfaces to those network segments)
> 
> man route for more options/details but it seems like you simply wish to route between the networks (unless I have the question wrong?)
> 
> HTH
> - Brian.
> 
> 
>