[plug] Routing to spark

[Mike Holland]

On Wed, 23 Oct 2002, Anthony J. Breeds-Taurima wrote:

> On Wed, 23 Oct 2002, Mike Holland wrote:
>
> >
> > Folks,
> > I've been unable to reach spark.plug.linux.org.au (resolves as 202.61.150.16)
> > dur to a routing loop in comindico.com.au .

> traceroute to 203.190.202.16 (203.190.202.16), 30 hops max, 38 byte packets

I can get to that address, but not the other. Spark is configured to both
addresses.
  Can anyone who isnt on WAIX reach plug.linux.org.au?
I wont expect any negative replies :-)


eth1      Link encap:Ethernet  HWaddr 00:00:3B:80:3C:9B
          inet addr:202.61.150.16  Bcast:202.61.150.255
Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:4633218 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3554563 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:55 Base address:0x9200

eth1:0    Link encap:Ethernet  HWaddr 00:00:3B:80:3C:9B
          inet addr:203.190.202.16  Bcast:203.190.202.127
Mask:255.255.255.128
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          Interrupt:55 Base address:0x9200