[plug] P4 1.4

[Chris Caston]

And it seems only the AGP slot in the mobo is burnt out so it may be
possible to get some life out of it (;

regards,

Chris

On Mon, 2003-12-15 at 21:28, Daniel Pearson wrote:
> Yeh, that's what I was thinking.. thanks Ben
> 
> Cheers,
> Daniel
> 
> ----- Original Message ----- 
> From: "Ben Jensz" <plug at jensz.id.au>
> To: <plug at plug.linux.org.au>
> Sent: Monday, December 15, 2003 9:02 PM
> Subject: Re: [plug] P4 1.4
> 
> 
> > I'd recommend putting thermal paste on, if anything it'll help disperse
> > heat via the heatsink/fan better.  Better to be safe than sorry :)
> >
> >
> > / Ben
> >
> >
> > Daniel Pearson wrote:
> >
> > >Hi Guys,
> > >Just received a machine with a p4 1.4ghz, with a burnt out mobo.. all I
> need
> > >to do is buy a new motherboard, and put it in and my new server will be
> good
> > >to go. Is there anything I need to take into consideration when putting
> the
> > >CPU from the old motherboard to the new one? Will the thermal paste need
> > >redoing? Or can I simply just take off the fan, pull out the cpu - and
> put
> > >both back on, with the new mobo? After all, don't wanna fry the chip ;-)
> > >
> > >Cheers,
> > >Daniel
> > >
> > >_______________________________________________
> > >plug mailing list
> > >plug at plug.linux.org.au
> > >http://mail.plug.linux.org.au/cgi-bin/mailman/listinfo/plug
> > >
> > >
> > >
> >
> >
> > _______________________________________________
> > plug mailing list
> > plug at plug.linux.org.au
> > http://mail.plug.linux.org.au/cgi-bin/mailman/listinfo/plug
> >
> 
> _______________________________________________
> plug mailing list
> plug at plug.linux.org.au
> http://mail.plug.linux.org.au/cgi-bin/mailman/listinfo/plug
>