[plug] USB Flash Drive

[Jon Miller]

Sorry, but this e-mail has been sent awhile ago and the problem was
solved.  Some how the email was sent again.  go figure????

JLM

On Mon, 2003-12-29 at 19:59, Dean Holland wrote:
> I have a USB adapter for a notebook drive currently plugged into a FC1
> system, lsmod shows that I have the scsi_mod and sd_mod (SCSI Disk
> module) loaded.
> 
> Once loaded, I access the drive as sdb (my SATA drive is picked up as
> sda).
> 
> Hope that's of some help.
> 
> Dean
> 
> On Mon, 2003-12-29 at 19:44, Jon Miller wrote:
> > I'm trying to install a usb 2.0 flash memory key on rhl9.  I've tried
> > /dev/sda1 and this doesn't work.  I also check lsmod and can see that
> > there is a module:
> > Module                  Size  Used by    Not tainted
> > soundcore               5924   0  (autoclean)
> > vfat                   11564   0  (autoclean)
> > fat                    35896   0  (autoclean) [vfat]
> > agpgart                43264   0  (unused)
> > iptable_filter          2316   0  (autoclean) (unused)
> > ip_tables              13624   1  [iptable_filter]
> > autofs                 11860   0  (autoclean) (unused)
> > nfs                    72152   5  (autoclean)
> > lockd                  52784   1  (autoclean) [nfs]
> > sunrpc                 74076   1  (autoclean) [nfs lockd]
> > e100                   48068   1
> > sg                     33740   0  (autoclean)
> > sr_mod                 16312   0  (autoclean)
> > cdrom                  30272   0  (autoclean) [sr_mod]
> > usb-storage            66048   0
> > keybdev                 2688   0  (unused)
> > mousedev                5076   1
> > hid                    20196   0  (unused)
> > input                   5472   0  [keybdev mousedev hid]
> > usb-uhci               23756   0  (unused)
> > usbcore                71328   1  [usb-storage hid usb-uhci]
> > ext3                   61792   6
> > jbd                    46644   6  [ext3]
> > ide-scsi               10640   0
> > sd_mod                 12780   0
> > scsi_mod              100632   5  [sg sr_mod usb-storage ide-scsi
> > sd_mod]
> > 
> > So I ran a modprobe usbcore but still I cannot access the key.
> > 
> > When I check the scsi this is the output:
> > ~# cat /proc/scsi/scsi
> > Attached devices:
> > Host: scsi0 Channel: 00 Id: 00 Lun: 00
> >   Vendor: ATAPI    Model: CD-RW 48X16      Rev: A.RZ
> >   Type:   CD-ROM                           ANSI SCSI revision: 02
> > Host: scsi0 Channel: 00 Id: 01 Lun: 00
> >   Vendor: ATAPI-CD Model: ROM-DRIVE-52MAX  Rev: 52AV
> >   Type:   CD-ROM                           ANSI SCSI revision: 02
> > Host: scsi1 Channel: 00 Id: 00 Lun: 00
> >   Vendor: BENQ     Model: USB Flash Drive  Rev: PROL
> >   Type:   Direct-Access                    ANSI SCSI revision: 02
> > 
> > Any ideas what I need to do next?
> > 
> > Thanks
> 
> _______________________________________________
> plug mailing list
> plug at plug.linux.org.au
> http://mail.plug.linux.org.au/cgi-bin/mailman/listinfo/plug
-- 
Jon Miller <jlmiller at mmtnetworks.com.au>
MMT Networks Pty Ltd