[plug] default route problems

[Tim Bowden]

On Thu, 2003-01-30 at 16:12, Mike Holland wrote:
> On 30 Jan 2003, Tim Bowden wrote:
> 
> > This should be a simple problem but I can't seem to find a solution.  On
> > my rh8 box I have 2 nic's. eth1 has a static ip on subnet .1.0 while
> > eth0 is set to use dhcp from the attached dlink 300+ cable modem.  It
> > gets set to .0.2. Ok so far. Problem: the default route is being set to
> > 192.168.0.254.
> 
> Thats sounds OK.
> 
> >  Where might this be set from?  I can't find it anywhere
> 
>  From DHCP, on the modem. I expect 192.168.0.254 is the modem's address?
> 
> Dont you want a default-route to the modem?

No.  The modem is in bridging mode.  I am using pppoe on the pc.  My
default route needs to be set to the ppp interface.
> 
> -- 
>  "I do not think we can hope for any better things now. We shall stick it out
> to the end, but we are getting weaker, of course, and the end cannot be far.
> It seems a pity, but I do not think I can write more." - RF Scott
> 
> 

Tim Bowden