[plug] IDE tape drive [solution]

Onno Benschop onno at itmaze.com.au
Sun Sep 28 18:55:34 WST 2003


Hi folks, you may recall a problem with an IDE tape drive not showing up
on the secondary ide channel under 2.4.18 or 2.4.21 on an Intel
d845ebg2. Here is the solution:

The problem:

Two HDD on IDE0 one Tape on IDE1 as Master - second channel is not
recognised by Linux anymore, even though the BIOS shows all three
devices.


The solution:

Move the slave drive from IDE0 to IDE1.


Now that it works, who needs to know this problem? Is it a BIOS issue,
is it a Kernel issue - who do I tell?

Cheers,

Onno Benschop 

Connected via Optus B3 at S15:51'18" - E128:45'05" (Crossing Falls, Kununurra, WA)
-- 
()/)/)()        ..ASCII for Onno.. 
|>>?            ..EBCDIC for Onno.. 
--- -. -. ---   ..Morse for Onno.. 

Proudly supported by Skipper Trucks, Highway1, Concept AV, Sony Central, Dalcon
ITmaze - ABN: 56 178 057 063 - ph: 04 1219 8888 - onno at itmaze dot com dot au

_______________________________________________
plug mailing list
plug at plug.linux.org.au
http://mail.plug.linux.org.au/cgi-bin/mailman/listinfo/plug


More information about the plug mailing list