[plug] Linux powered ADSL modem

[Ben Keith]

The early Netcomm NB1400 modems ran linux.  Netcomm have been quite
happy to answer questions I've asked in the past.  Try asking them
directly:

support at netcomm.com.au

I had a half hearted look for the NB3 on their website but couldn't find
a mention, are you sure you have the right model number?  

Ben 



On Wed, 2004-08-18 at 23:08, Chris Caston wrote:
> On Wed, 2004-08-18 at 23:04, Chris Caston wrote:
> > On Wed, 2004-08-18 at 22:55, Craig Ringer wrote:
> > > On Wed, 18 Aug 2004 10:57 pm, Chris Caston wrote:
> > > 
> > > > That's close what I was thinking. A single device adsl modem / firewall.
> > > > All we need next it one with multiple interfaces for different network
> > > > segments.
> > > 
> > > The magic of some USB NICs?
> > 
> > Well if the adsl modem has been an ethernet and a USB interface there is
> > a possibility that you *may* be able to do something with that.
> 
> I still haven't found out what the Netcomm NB 3 runs. Anyone have access
> to one of these and care to telnet into or nmap -O it?
> 
> But it *should* be theoretically possible to port linux to many ADSL
> modems by writing your own firmware but of course that would be easier
> said than done.
> > > --
> > > Craig Ringer
> > > _______________________________________________
> > > PLUG discussion list: plug at plug.linux.org.au
> > > http://mail.plug.linux.org.au/cgi-bin/mailman/listinfo/plug
> > > Committee e-mail: committee at plug.linux.org.au
> > > 
> > 
> > _______________________________________________
> > PLUG discussion list: plug at plug.linux.org.au
> > http://mail.plug.linux.org.au/cgi-bin/mailman/listinfo/plug
> > Committee e-mail: committee at plug.linux.org.au
> > 
> 
> _______________________________________________
> PLUG discussion list: plug at plug.linux.org.au
> http://mail.plug.linux.org.au/cgi-bin/mailman/listinfo/plug
> Committee e-mail: committee at plug.linux.org.au