[plug] printer setup for desktop rhl8 PC

[Jon Miller]

See below for response

Jon L. Miller, MCNE, CNS, ASE
Director/Sr Systems Consultant
MMT Networks Pty Ltd
http://www.mmtnetworks.com.au

"I don't know the key to success, but the key to failure
 is trying to please everybody." -Bill Cosby



>>> cgherardi at iprimus.com.au 9:22:07 pm 4/02/2004 >>>
Hi Jon,

Did you have any luck with this?

On Fri, 2004-01-30 at 12:29, Jon Miller wrote:
> I'm trying to setup a printer that is on the network using ipp
> protocol.  The printer is a HP4050 and it has a network card attached to
> it.  This is running on a Novell NetWare IPP protocol. 

One of us is confused. Are you saying the printer is running ipp or your
are trying to print via a Novell queue, which just happens to be
printing via ipp.

JLM> The network protocol for printing is IPP, this is done after setting up NDPS on the NetWare Server.  To setup NDPS you create a NDPS Broker, Manager and Printer Agent on the NetWare server.  Then you select a NDPS printer to be accessed via IPP.  Once this is done the printer can be accessed via IPP with the Novell IPP Client installed.  

> My question is I have selected the HP JetDirect  as the Queue Type and
> for the printer I've put in ipp://192.168.1.5/ipp/pa_hp4050 on port 631
> (standard ipp port).

Again is the printer or server the above ip?

JLM> printer op address


Carl

_______________________________________________
plug mailing list
plug at plug.linux.org.au
http://mail.plug.linux.org.au/cgi-bin/mailman/listinfo/plug
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.plug.org.au/pipermail/plug/attachments/20040204/3cafffe6/attachment.htm>