[plug] ppp problems - No Response to PAP authenticate-requests

[Brad Hill]

I'm trying to use a USB connection to an NT1 plus II to dial an ISDN router
(netgear RT338).
On a redhat 7.2 system dialing with wvdial:

# cat /etc/wvdial.conf
[Dialer Defaults]
Modem = /dev/input/ttyACM0
Baud = 57600
Init = ATZ
Init2 = AT!T0=0
Phone = 0294608954
Username = Brad
Password = xxxxxxxx

# cat /etc/ppp/options
lock
debug

Debug output is as follows:

Jan  6 10:08:41 mail pppd[23079]: pppd 2.4.1 started by root, uid 0
Jan  6 10:08:41 mail pppd[23079]: using channel 32
Jan  6 10:08:41 mail pppd[23079]: Using interface ppp0
Jan  6 10:08:41 mail pppd[23079]: Connect: ppp0 <--> /dev/input/ttyACM0
Jan  6 10:08:44 mail pppd[23079]: rcvd [LCP ConfReq id=0xc3 <mru 1524>
<asyncmap 0x0> <auth pap> <magic 0x7211526> <accomp>]
Jan  6 10:08:44 mail pppd[23079]: sent [LCP ConfReq id=0x1 <asyncmap 0x0>
<magic 0x42781e02> <pcomp> <accomp>]
Jan  6 10:08:44 mail pppd[23079]: sent [LCP ConfAck id=0xc3 <mru 1524>
<asyncmap 0x0> <auth pap> <magic 0x7211526> <accomp>]
Jan  6 10:08:44 mail pppd[23079]: rcvd [LCP ConfRej id=0x1 <asyncmap 0x0>]
Jan  6 10:08:44 mail pppd[23079]: sent [LCP ConfReq id=0x2 <magic
0x42781e02> <pcomp> <accomp>]
Jan  6 10:08:44 mail pppd[23079]: rcvd [LCP ConfAck id=0x2 <magic
0x42781e02> <pcomp> <accomp>]
Jan  6 10:08:44 mail pppd[23079]: sent [PAP AuthReq id=0x1 user="Brad"
password=<hidden>]
Jan  6 10:08:47 mail pppd[23079]: sent [PAP AuthReq id=0x2 user="Brad"
password=<hidden>]
Jan  6 10:08:50 mail pppd[23079]: sent [PAP AuthReq id=0x3 user="Brad"
password=<hidden>]
Jan  6 10:08:53 mail pppd[23079]: sent [PAP AuthReq id=0x4 user="Brad"
password=<hidden>]
Jan  6 10:08:56 mail pppd[23079]: sent [PAP AuthReq id=0x5 user="Brad"
password=<hidden>]
Jan  6 10:08:59 mail pppd[23079]: sent [PAP AuthReq id=0x6 user="Brad"
password=<hidden>]
Jan  6 10:09:02 mail pppd[23079]: sent [PAP AuthReq id=0x7 user="Brad"
password=<hidden>]
Jan  6 10:09:05 mail pppd[23079]: sent [PAP AuthReq id=0x8 user="Brad"
password=<hidden>]
Jan  6 10:09:08 mail pppd[23079]: sent [PAP AuthReq id=0x9 user="Brad"
password=<hidden>]
Jan  6 10:09:11 mail pppd[23079]: sent [PAP AuthReq id=0xa user="Brad"
password=<hidden>]
Jan  6 10:09:14 mail pppd[23079]: No response to PAP authenticate-requests
Jan  6 10:09:14 mail pppd[23079]: sent [LCP TermReq id=0x3 "Failed to
authenticate ourselves to peer"]
Jan  6 10:09:15 mail pppd[23079]: rcvd [LCP TermAck id=0x3]
Jan  6 10:09:15 mail pppd[23079]: Connection terminated.
Jan  6 10:09:15 mail pppd[23079]: Exit.

As you can see, it's not even bothering to acknoledge the fact that i've
asked to be authorized... which is a pain.  Other systems are logging into
it just fine though, so there must be something i can change from the
dialing end to fix things...?

Regards,

Brad Hill
Marketcast Support Team
MarketCast Information Services
ph:  1300 655 818
support at marketcast.com.au

****************************************************************************
*********************************
Important Notice:
This email is for the named recipient only. Its contents are confidential.
If you are not the authorized recipient you must not use, disclose or copy
any of these contents.
If you receive this email in error please contact us immediately and delete
the email from your system.

****************************************************************************
********************************