[plug] Still not able to route to adsl

[raven at themaw.net]

On Sun, 2 May 2004, bob wrote:

> On Sunday 02 May 2004 00:27, raven at themaw.net wrote:
> > What is in the routing table in the NB?
> 
> Route Table
> 
> Destination	Netmask	Gateway	Interface
> 0.0.0.0	0.0.0.0	202.72.191.x	ppp1
> 192.168.0.0	255.255.255.0	192.168.1.x	br0
> 192.168.0.x	255.255.255.255	192.168.1.x	br0
> 192.168.1.0	255.255.255.0	192.168.1.1	br0
> 192.168.1.x	255.255.255.255	192.168.1.1	br0
> 127.0.0.1	255.0.0.0	127.0.0.1	lo0
> 202.72.191.x	255.255.255.255	202.72.133.x	ppp1
>

So anything destined for 192.168.[01] networks is sent to br0.
And anything else goes to ppp1. Except packets destined for 127.0.0.1.

Correct?

And you are NATing "only" on the NB1300 at this point in your 
investigation right?

> Manually Configured Routes
> 
> #	Destination	Netmask	Gateway
> 1	192.168.0.x	255.255.255.255	192.168.1.x
> 2	192.168.0.0	255.255.255.0	192.168.1.x
> 3	192.168.1.x	255.255.255.255	192.168.1.1
> 
> (All 192.168.1.x are the same addr)

Why have you got host routes here at all.
Why have these routes been repeated. They are in the route table above.

So what is the setup of the Gateway/firewall or was that it above and I've 
misunderstood?

Ian