[plug] Help needed with CDRECORD on Mdk 10 Official

[Richard Meyer]

Hi People,

I installed Mdk 10 Official last night and I was gratified at how snazzy it
was. Everything I tried worked beautifully until ....

I tried to burn an iso.

I got the following:

<quote>

[root at PerthMdk downloads]# cdrecord -scanbus
Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to
<warly at mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this
version.
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version
(warly-scsi-linux-sg.c-1.80-mdk '@(#)scsi-linux-sg.c 1.80 04/03/08
Copyright 1997 J. Schilling').
scsibus0:
        0,0,0     0) *
        0,1,0     1) 'SONY    ' 'CD-RW  CRX210E1 ' '2YS2' Removable CD-ROM
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *
        0,5,0     5) *
        0,6,0     6) *
        0,7,0     7) *
scsibus1:
        1,0,0   100) *
        1,1,0   101) 'LITEON  ' 'DVD-ROM LTD163D ' 'GHR3' Removable CD-ROM
        1,2,0   102) *
        1,3,0   103) *
        1,4,0   104) *
        1,5,0   105) *
        1,6,0   106) *
        1,7,0   107) *
[root at PerthMdk downloads]# cdrecord -v dev=0,1,0
KNOPPIX_V3.4-2004-05-04-EN.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent
defaults.
Cdrecord-Clone 2.01a27-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to
<warly at mandrakesoft.com>.
Note: The author of cdrecord should not be bothered with problems in this
version.
TOC Type: 1 = CD-ROM
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
cdrecord: No such file or directory. Cannot open '/dev/pg1'. Cannot open
SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are
root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
[root at PerthMdk downloads]#

</quote>


Just prior to this (when I was burning the MDk 10 CD's the SCSI dev was
0,0,0)

I realise that the burners are now considered ATAPI devices, not SCSI, but
where do I go from here?

RichardM