[plug] NIC Information

[Ryan King]

what about kernel messages?  looked at those?  (most modules will report
'link up/down when the link goes active/inactive)

ie: check 'dmesg' or your kernel log.

is the device actually up?  check ifconfig.

On Fri, 2005-12-09 at 11:01 +0800, Shawn Owens wrote:
> This box doesn't have ethtool loaded
> 
> 
> -----Original Message-----
> From: plug-bounces at plug.org.au [mailto:plug-bounces at plug.org.au] On
> Behalf Of Ryan King
> Sent: Friday, 9 December 2005 11:00 AM
> To: plug at plug.org.au
> Subject: Re: [plug] NIC Information
> 
> 
> use ethtool
> check 'dmesg' for nic state messages (not available on some modules)