[plug] please help me with this....

[Evert van Dijk]

I cheated a little when I did this I downloaded the rpm
ftp://ftp.xmms.org/pub/xmms/1.2.x/rpm/fc1/xmms-1.2.10-1.i386.rpm
or http://www.xmms.org/files/1.2.x/rpm/fc1/xmms-1.2.10-1.i386.rpm

when done then open a shell and go superuser (su)
and type rpm -i /path/to/xmms-1.2.10-1.i386.rpm
make sure to use tab for command completion

Sorry that I cannot help with the environmental settings
good luck

E.

Tata Dano wrote:

>Hello...
>
>I'm trying to install XMMS in my FC1. In the installation of glib
>1.2.2 I've got this message at the bottom:
>
>'lib-config --version' returned 1.2.2, but GLIB (1.2.10) was found! If
>glib-config was correct, then it is best to remove the old version of
>GLIB. You may also be able to fix the error by modifying your
>LD_LIBRARY_PATH environment variable, or by editing /etc/ld.so.conf.
>Make sure you have run ldconfig if that is required on your system. If
>glib-config was wrong, set the environment variable GLIB_CONFIG to
>point to the correct copy of glib-config, and remove the file
>config.cache before re-running configure..
>
>Please help me.....
>
>Thank you in advance.
>
>To the best,
>
>Tata
>_______________________________________________
>PLUG discussion list: plug at plug.org.au
>http://www.plug.org.au/mailman/listinfo/plug
>Committee e-mail: committee at plug.linux.org.au
>
>  
>