[plug] [OT] Changing logic boards on failed seagate drives?
Fred Janon
fjanon at yahoo.com
Fri Dec 1 13:07:08 WST 2006
I did it several times with different drives with some success, since I
did not know if the controller was dead or the drive itself. A couple
of time it worked, recently on several 2.5". There was a bad batch of
IBM drives in Dell laptops and I also fed my laptop with cereal and
milk one morning. I was lucky to have the same drive to borrow the
controller to get the data off it. I am not sure of what you mean by
exact same controller. I don't know if mine had the same firmware on
them, but definitely the same controller type for the same drive.
--- Chris Caston <caston at arach.net.au> wrote:
> Hello,
>
> Has anyone here ever changed the logic board on a failed seagate
> drive
> without or without success?
>
> I notice they are fairly easy to remove with the right screw-bit. Did
> you require the exact same logic board to get data off the drive?
>
>
> thanks,
>
> Chris
>
>
>
> _______________________________________________
> PLUG discussion list: plug at plug.org.au
> http://www.plug.org.au/mailman/listinfo/plug
> Committee e-mail: committee at plug.linux.org.au
>
More information about the plug
mailing list