[plug] DNS not working on SLES10

[Jon Miller]

Dig works on the dns server, but the issue is why the workstations are not working, cannot do nslookup.

Jon

>>> mark at mjg.id.au 5:38:37 pm 8/02/2007 >>>
Have you tried to DIG or NSLOOKUP the domains to see if there is any
resolution taking place. Have a look at the logs to see if the name server
is starting up without any errors.  DNS will usually fail a badly
configured
domain and continue to run.

Mark
--

*********** REPLY SEPARATOR  ***********

On 9/02/2007 at 5:13 AM Jon  Miller wrote:

>I'm having an issue where on a SLES10 box DNS is not working properly. 
>It does load up, when I try to ping any servers on the internal network I
>get "unknown host".  The zone files are setup with both the regular zone
>file with host to ip address and another file with reverse address to host
>file. The master zone file is looking at an upstream dns server, but there
>is not way to tell if this is working other then a ping test.
>Any idea on what may be the problem?
>
>Tests I've run:
> named-checkzone domain.wa.edu.au db.domain.wa.edu.au.int
>results:
>zone domain.wa.edu.au/IN: has no NS records
>
>
>
>J
>_______________________________________________
>PLUG discussion list: plug at plug.org.au 
>http://www.plug.org.au/mailman/listinfo/plug 
>Committee e-mail: committee at plug.linux.org.au 



_______________________________________________
PLUG discussion list: plug at plug.org.au 
http://www.plug.org.au/mailman/listinfo/plug 
Committee e-mail: committee at plug.linux.org.au