[plug] issue with squid proxy on sles 10

Jon Miller jlmiller at mmtnetworks.com.au
Wed Jan 31 11:46:54 WST 2007


Bill,
Got it to work thanks to Stephen at Informed Technology.
There were some tags that needed setting up.


Jon

>>> billk at iinet.net.au 7:59:39 pm 30/01/2007 >>>
Hi Jon, do the quid access logs show anything then?  Has squid.conf been
configured with the allowed networks etc?

For example, gentoo's default config is to refuse to have anything to do
with clients until you specifically set them up in squid.conf.  Also,
are you using a transparent proxy with a 2.6 squid - things changed so
an old config file (or rather some settings) wont work.

BillK

On Tue, 2007-01-30 at 10:26 +0800, Jon Miller wrote:
> Bill,
> Did look into this but still no joy.  Finally got rid of the route I thought was causing the problem by changing the way the the network comes up (e.g via the NetworkManager).  But still no joy in the users getting access to the Internet.  The gateway server can access the Internet, but the user pc cannot.  We get a (113) no route to host from the IE6 browser.
> 
> Jon  
> 
> 
> >>> billk at iinet.net.au 01/29/07 17:18 PM >>>
> "man route"
> 
> BillK
> 
> 
> 
> On Tue, 2007-01-30 at 08:14 +0800, Jon Miller wrote:
> > Setting up proxy on a sles 10 server.  Problem I have is that when a user tris to go to the internet they cannot because the return route is getting confused.
> > Got the following issuing a netstat command.
> > Kernel IP routing table
> > Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
> > 10.129.24.0     0.0.0.0         255.255.248.0   U         0 0          0 eth0
> > 169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 eth0
> > 127.0.0.0       0.0.0.0         255.0.0.0       U         0 0          0 lo
> > 0.0.0.0         10.129.24.1     0.0.0.0         UG        0 0          0 eth0
> > 
> > Any idea how to get rid of the 169.254.0.0 route?
> > 
> > Thanks
> > 
> > 
> > Jon
> > _______________________________________________
> > PLUG discussion list: plug at plug.org.au 
> > http://www.plug.org.au/mailman/listinfo/plug 
> > Committee e-mail: committee at plug.linux.org.au 
-- 
William Kenworthy <billk at iinet.net.au>
Home!
_______________________________________________
PLUG discussion list: plug at plug.org.au 
http://www.plug.org.au/mailman/listinfo/plug 
Committee e-mail: committee at plug.linux.org.au




More information about the plug mailing list