[plug] Remote desktop question

[Chris Griffin]

Greetings to the oh so quite list.

I actually have a question, I have a RedHat, well Fedora actually.
I have a box I set up and then went in and set "System>Internet and
Network>Remote Desktop" with the appropriate options to allow me to remote
desktop to it. I even tested it and all was well. When I now come to connect
across the network to it via vncviewer I find it does not work.
I can ssh to the box and tcpdump confirms that my packets get to it and it
answers:

[rsupport at syslog sysconfig]# tcpdump port 5900
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
14:48:19.642330 IP 192.168.80.80.4558 > syslog.5900: S
176584143:176584143(0) win 65535 <mss 1460,nop,nop,sackOK>
14:48:19.654136 IP syslog.5900 > 192.168.80.80.4558: R 0:0(0) ack 176584144
win 0
14:48:20.061598 IP 192.168.80.80.4558 > syslog.5900: S
176584143:176584143(0) win 65535 <mss 1460,nop,nop,sackOK>
14:48:20.061621 IP syslog.5900 > 192.168.80.80.4558: R 0:0(0) ack 1 win 0
14:48:20.563783 IP 192.168.80.80.4558 > syslog.5900: S
176584143:176584143(0) win 65535 <mss 1460,nop,nop,sackOK>
14:48:20.563805 IP syslog.5900 > 192.168.80.80.4558: R 0:0(0) ack 1 win 0

But VNC just says "Failed to connect"
I have been looking for the config files for remote desktop (I have checked
other systems that are working and it does NOT use the vncserver config
file), any suggestions?

Regards,
Chris G
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.plug.org.au/pipermail/plug/attachments/20080214/a8ee99ea/attachment.html>