[plug] Remote desktop question

[Chris Griffin]

I am actually trying to connect to it from a Windblows desktop, so gui
interface with defaults.


On Thu, Feb 14, 2008 at 3:53 PM, Tomasz Grzegurzko <tomasz89 at gmail.com>
wrote:

> On Feb 14, 2008 3:51 PM, Chris Griffin <griffinster at gmail.com> wrote:
> > Greetings to the oh so quite list.
> >
> > I actually have a question, I have a RedHat, well Fedora actually.
> > I have a box I set up and then went in and set "System>Internet and
> > Network>Remote Desktop" with the appropriate options to allow me to
> remote
> > desktop to it. I even tested it and all was well. When I now come to
> connect
> > across the network to it via vncviewer I find it does not work.
> >  I can ssh to the box and tcpdump confirms that my packets get to it and
> it
> > answers:
> >
> > [rsupport at syslog sysconfig]# tcpdump port 5900
> > tcpdump: verbose output suppressed, use -v or -vv for full protocol
> decode
> > listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
> >  14:48:19.642330 IP 192.168.80.80.4558 > syslog.5900: S
> > 176584143:176584143(0) win 65535 <mss 1460,nop,nop,sackOK>
> > 14:48:19.654136 IP syslog.5900 > 192.168.80.80.4558: R 0:0(0) ack
> 176584144
> > win 0
> > 14:48:20.061598 IP 192.168.80.80.4558 > syslog.5900: S
> > 176584143:176584143(0) win 65535 <mss 1460,nop,nop,sackOK>
> >  14:48:20.061621 IP syslog.5900 > 192.168.80.80.4558: R 0:0(0) ack 1 win
> 0
> > 14:48:20.563783 IP 192.168.80.80.4558 > syslog.5900: S
> > 176584143:176584143(0) win 65535 <mss 1460,nop,nop,sackOK>
> > 14:48:20.563805 IP syslog.5900 > 192.168.80.80.4558: R 0:0(0) ack 1 win
> 0
> >
> > But VNC just says "Failed to connect"
> > I have been looking for the config files for remote desktop (I have
> checked
> > other systems that are working and it does NOT use the vncserver config
> > file), any suggestions?
> >
> > Regards,
> > Chris G
> >
> > _______________________________________________
> > PLUG discussion list: plug at plug.org.au
> > http://www.plug.org.au/mailman/listinfo/plug
> > Committee e-mail: committee at plug.linux.org.au
> >
> >
>
> What is your vncviewer syntax?
>
> Tomasz
> _______________________________________________
> PLUG discussion list: plug at plug.org.au
> http://www.plug.org.au/mailman/listinfo/plug
> Committee e-mail: committee at plug.linux.org.au
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.plug.org.au/pipermail/plug/attachments/20080214/2e7d1cff/attachment.html>