[plug] Routing with nonat - ssh tunnel and port forwarding

[William Kenworthy]

openvpn is probably the best choice here.

BillK

On Wed, 2009-03-18 at 22:03 +0900, Carl Gherardi wrote:
> Hey all,
> 
> I need to get traffic from a network ip 10.61.6.1 to another WAN ip
> address 10.61.0.1 _as the same ip address_ - ie no nat
> 
> The boxes exist in different states, and a peice of hardware betwees
> us currently dropping traffic into the bit bucket.
> 
> I need to establish a tunnel of some sort that hops the broken link.
> 
> I've been able to set up ssh forwarding and port forwarding to bridge
> the gap between networks, but i'm stumbling on this last application
> that must have the real ip addresses talking directly between
> themselves.
> 
> I'm open to any and all suggestions, and they dont need to be linux based
> 
> Any help very appreciated.
> 
> Thanks
> 
> Carl G
> _______________________________________________
> PLUG discussion list: plug at plug.org.au
> http://www.plug.org.au/mailman/listinfo/plug
> Committee e-mail: committee at plug.linux.org.au
-- 
William Kenworthy <billk at iinet.net.au>
Home in Perth!