[plug] (no subject)

[Jon L Miller]

I've been trying to install SuSE Linux v 11 SP1 on a new server with Intel
server board S5520HC, it is configured with 2 HDD as a RAID1.  During the
installation of the files it stops with an error stating "dynamic shared
library libraid-events-dff1.so" could not be loaded.  From there it want to
know if you want to fall back to
/dev/disk/by-id/raid-ddf1_4c534920020202........part7(Y/n).  This all
happens after a message states "RAID set 4c534920020202........" was
activated.

 

Thanks

 

Jon

 

 

Jon L Miller

MMT Networks Pty Ltd

e: jlmiller at mmtnetworks.com.au

p: +618 9375 6597

m: +61 412 126 166

 

Disclaimer

This message contains confidential information and is intended only for the
individual named. If you are not the named addressee you should not
disseminate, distribute or copy this e-mail. Please notify the sender
immediately by e-mail if you have received this e-mail by mistake and delete
this e-mail from your system. E-mail transmission cannot be guaranteed to be
secure or error-free as information could be intercepted, corrupted, lost,
destroyed, arrive late or incomplete, or contain viruses. The sender
therefore does not accept liability for any errors or omissions in the
contents of this message, which arise as a result of e-mail transmission.

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.plug.org.au/pipermail/plug/attachments/20110209/a9732b82/attachment.html>