[plug] error trying to boot into ubuntu 10

[Chris Hoy Poy]

Hi David,

My 2c based on a pretty quick review .. so its possible I missed something .. ;) 

I think you ran into some kernel/libata issue (or the harddrive is on the way out) - theres evidence there for either scenario I think. Testing and looking at the SMART counters on the harddrive from a system that you know has a working SMART implementation might check that. A few bad blocks in the wrong spot could affect only one partition etc, and a libata/kernel issue would likely only hurt the volume mounted RW at the time.. 

As to the partition .. if that is the root partition, you might try it from a different (again known,working system) - that seems to work well for me in recovering "interrupted" partitions - but if fsck is whinging off the bat... I usually turn to my backups at that point. Even if you did manage to recover it - I've had a few lingering splats of weirdness when I've been too slack to simply copy the data off, reformat etc. Those were a few years ago now, things might have changed - but I changed my practices and tend to err on the side of caution these days. Some problem will crop up in the future and you'll be sitting there going "is this a result of that? am I looking at some other symptom of that problem?" and those problems tend to keep me awake at night. I like my sleep ;) 

//chris


----- Original Message -----
From: dbuddrige at bigpond.com
To: plug at plug.linux.org.au
Sent: Saturday, 26 March, 2011 9:24:40 AM
Subject: [plug] error trying to boot into ubuntu 10

hi all,

I have recently installed a ubuntu 10 system [dual-booted with windows],
with the main root partition being ext3. However, on rebooting the
system, after the grub menu displayed, and I selected the option to boot
into linux, it displayed an error and then went into a highly limited
session. Unfortunatetly, from this state I was unable to gain any access
to any of the hard-drives, so I rebooted off the ubuntu10 cd and then
tried to mount the root hard-drive from there.

On doing so, I got a message saying:

"Error mounting; mount: wrong fs type, bad option, bad superblock on
/dev/sda5, missing codepage or helper program, or other error. In some
cases useful info is found in syslog - try dmesg | tail or so"

So, I brought up a terminal and ran the command dmesg > dmesg-error.txt,
and have pasted the contents of this to the bottom of this email.

I have attempted to perform the command: fsck -t ext3 /dev/sda5

however this reported that the superblock was corrupt and to try an
alternative.

Is there a way to recover from this, or do I have to reformat and start
again? This is [incidentally] the second time this has happened - I had
previously re-formatted and re-installed ubuntu because of this problem
- I am wondering if this indicates a hardware problem with the
hard-drive [although this would seem odd since the windows partition
[from which I am composing this email] still works and I can boot into
it.

Perhaps I need to fully delete the sda5 partition and re-create it
[rather than simply reformatting it].

Does anyone have any ideas? This one is a bit beyond me.

thanks heaps guys,

David.

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-22-generic (buildd at rothera) (gcc
version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep
19 20:34:50 UTC 2010 (Ubuntu 2.6.35-22.33-generic 2.6.35.4)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe72000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe72000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled:
non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable) [ 0.000000] last_pfn = 0xbfe72 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106 [ 0.000000] e820 update range: 00000000bff00000 -
0000000100000000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000002000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved)
[ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bfe72000 (usable)
[ 0.000000] modified: 00000000bfe72000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[ 0.000000] RAMDISK: 7f51e000 - 80000000
[ 0.000000] Allocated new RAMDISK: 009a5000 - 0148698f
[ 0.000000] Move RAMDISK from 000000007f51e000 - 000000007ffff98e to
009a5000 - 0148698e
[ 0.000000] ACPI: RSDP 000fb8d0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT bfe73a00 00064 (v01 DELL M08 27D8051D ASL
00000061) [ 0.000000] ACPI: FACP bfe7389c 000F4 (v04 DELL M08 27D8051D
ASL 00000061)
[ 0.000000] ACPI: DSDT bfe74000 04BD0 (v02 INT430 SYSFexxx 00001001 INTL
20050624) [ 0.000000] ACPI: FACS bfe82800 00040
[ 0.000000] ACPI: HPET bfe73b00 00038 (v01 DELL M08 00000001 ASL
00000061) [ 0.000000] ACPI: APIC bfe73c00 00068 (v01 DELL M08 27D8051D
ASL 00000047)
[ 0.000000] ACPI: MCFG bfe73bc0 0003E (v16 DELL M08 27D8051D ASL
00000061) [ 0.000000] ACPI: OSFR bfe73200 0002C (v01 DELL M08 27D8051D
ASL 00000061)
[ 0.000000] ACPI: SLIC bfe73c9c 00176 (v01 DELL M08 27D8051D ASL
00000061) [ 0.000000] ACPI: BOOT bfe737c0 00028 (v01 DELL M08 27D8051D
ASL 00000061)
[ 0.000000] ACPI: SSDT bfe7217e 004CC (v01 PmRef CpuPm 00003000 INTL
20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2182MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bfe72
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x00000002
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfe72
[ 0.000000] On node 0 totalpages: 785922
[ 0.000000] free_area_init_node: node 0, pgdat c07ffd40, node_mem_map
c1488020 [ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4365 pages used for memmap
[ 0.000000] HighMem zone: 554343 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl
dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level) [ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] PM: Registered nosave memory: 0000000000002000 -
0000000000010000 [ 0.000000] PM: Registered nosave memory:
000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
0000000000100000 [ 0.000000] Allocating PCI resources starting at
c0000000 (gap: c0000000:38000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2
nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s36416
r0 d20928 u2097152
[ 0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 779781
[ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed
boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6,
262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 15720660 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] Subtract (48 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 00009a0adc] TEXT DATA BSS
[ 0.000000] #3 [000009f000 - 0000100000] BIOS reserved
[ 0.000000] #4 [00009a1000 - 00009a4188] BRK
[ 0.000000] #5 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #6 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #7 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #8 [00009a5000 - 0001487000] NEW RAMDISK
[ 0.000000] #9 [0001487000 - 0001488000] BOOTMEM
[ 0.000000] #10 [0001488000 - 0002c88000] BOOTMEM
[ 0.000000] #11 [0002c88000 - 0002c88004] BOOTMEM
[ 0.000000] #12 [0002c88040 - 0002c88100] BOOTMEM
[ 0.000000] #13 [0002c88100 - 0002c88154] BOOTMEM
[ 0.000000] #14 [0002c88180 - 0002c8b180] BOOTMEM
[ 0.000000] #15 [0002c8b180 - 0002c8b250] BOOTMEM
[ 0.000000] #16 [0002c8b280 - 0002c97280] BOOTMEM
[ 0.000000] #17 [0002c97280 - 0002c972a5] BOOTMEM
[ 0.000000] #18 [0002c972c0 - 0002c972e7] BOOTMEM
[ 0.000000] #19 [0002c97300 - 0002c974a4] BOOTMEM
[ 0.000000] #20 [0002c974c0 - 0002c97500] BOOTMEM
[ 0.000000] #21 [0002c97500 - 0002c97540] BOOTMEM
[ 0.000000] #22 [0002c97540 - 0002c97580] BOOTMEM
[ 0.000000] #23 [0002c97580 - 0002c975c0] BOOTMEM
[ 0.000000] #24 [0002c975c0 - 0002c97600] BOOTMEM
[ 0.000000] #25 [0002c97600 - 0002c97640] BOOTMEM
[ 0.000000] #26 [0002c97640 - 0002c97680] BOOTMEM
[ 0.000000] #27 [0002c97680 - 0002c976c0] BOOTMEM
[ 0.000000] #28 [0002c976c0 - 0002c97700] BOOTMEM
[ 0.000000] #29 [0002c97700 - 0002c97740] BOOTMEM
[ 0.000000] #30 [0002c97740 - 0002c97780] BOOTMEM
[ 0.000000] #31 [0002c97780 - 0002c977c0] BOOTMEM
[ 0.000000] #32 [0002c977c0 - 0002c977d0] BOOTMEM
[ 0.000000] #33 [0002c97800 - 0002c97810] BOOTMEM
[ 0.000000] #34 [0002c97840 - 0002c978a4] BOOTMEM
[ 0.000000] #35 [0002c978c0 - 0002c97924] BOOTMEM
[ 0.000000] #36 [0003000000 - 000300e000] BOOTMEM
[ 0.000000] #37 [0003200000 - 000320e000] BOOTMEM
[ 0.000000] #38 [0002c99940 - 0002c99944] BOOTMEM
[ 0.000000] #39 [0002c99980 - 0002c99984] BOOTMEM
[ 0.000000] #40 [0002c999c0 - 0002c999c8] BOOTMEM
[ 0.000000] #41 [0002c99a00 - 0002c99a08] BOOTMEM
[ 0.000000] #42 [0002c99a40 - 0002c99ae8] BOOTMEM
[ 0.000000] #43 [0002c99b00 - 0002c99b68] BOOTMEM
[ 0.000000] #44 [0002c99b80 - 0002c9db80] BOOTMEM
[ 0.000000] #45 [0002c9db80 - 0002d1db80] BOOTMEM
[ 0.000000] #46 [0002d1db80 - 0002d5db80] BOOTMEM
[ 0.000000] #47 [000320e000 - 000410c0d4] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bfe72)
[ 0.000000] Memory: 3082764k/3144136k available (4928k kernel code,
60924k reserved, 2336k data, 684k init, 2234832k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0819000 - 0xc08c4000 ( 684 kB)
[ 0.000000] .data : 0xc05d029e - 0xc0818668 (2336 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05d029e (4928 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2494.016 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4988.03 BogoMIPS (lpj=9976064)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004025] Security Framework initialized
[ 0.004041] AppArmor: AppArmor initialized
[ 0.004043] Yama: becoming mindful.
[ 0.004091] Mount-cache hash table entries: 512
[ 0.004209] Initializing cgroup subsys ns
[ 0.004213] Initializing cgroup subsys cpuacct
[ 0.004217] Initializing cgroup subsys memory
[ 0.004225] Initializing cgroup subsys devices
[ 0.004226] Initializing cgroup subsys freezer
[ 0.004228] Initializing cgroup subsys net_cls
[ 0.004254] CPU: Physical Processor ID: 0
[ 0.004256] CPU: Processor Core ID: 0
[ 0.004258] mce: CPU supports 6 MCE banks
[ 0.004266] CPU0: Thermal monitoring enabled (TM2)
[ 0.004269] using mwait in idle threads.
[ 0.004276] Performance Events: PEBS fmt0+, Core2 events, Intel PMU
driver. [ 0.004285] ... version: 2
[ 0.004287] ... bit width: 40
[ 0.004288] ... generic registers: 2
[ 0.004290] ... value mask: 000000ffffffffff
[ 0.004291] ... max period: 000000007fffffff
[ 0.004293] ... fixed-purpose events: 3
[ 0.004294] ... event mask: 0000000700000003
[ 0.008191] ACPI: Core revision 20100428
[ 0.015105] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.015110] ftrace: allocating 21758 entries in 43 pages
[ 0.016037] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016411] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059297] CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06
[ 0.060000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.148014] Brought up 2 CPUs
[ 0.148017] Total of 2 processors activated (9975.47 BogoMIPS).
[ 0.148946] devtmpfs: initialized
[ 0.148946] regulator: core version 0.5
[ 0.148946] Time: 8:33:13 Date: 03/26/11
[ 0.148946] NET: Registered protocol family 16
[ 0.148946] Trying to unpack rootfs image as initramfs...
[ 0.149010] EISA bus registered
[ 0.149017] ACPI: bus type pci registered
[ 0.149083] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.149086] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in
E820 [ 0.149087] PCI: Using MMCONFIG for extended config space
[ 0.149089] PCI: Using configuration type 1 for base access
[ 1.148154] bio: create slab <bio-0> at 0
[ 1.149240] ACPI: EC: Look up EC in DSDT
[ 1.152647] ACPI: BIOS _OSI(Linux) query ignored
[ 1.158030] ACPI: SSDT bfe82880 00043 (v01 LMPWR DELLLOM 00001001 INTL
20050624)
[ 1.158304] ACPI: Dynamic OEM Table Load:
[ 1.158307] ACPI: SSDT (null) 00043 (v01 LMPWR DELLLOM 00001001 INTL
20050624) [ 1.172694] ACPI: SSDT bfe72cb4 002C8 (v01 PmRef Cpu0Ist
00003000 INTL 20050624)
[ 1.172983] ACPI: Dynamic OEM Table Load:
[ 1.172986] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL
20050624) [ 1.173267] ACPI: SSDT bfe7264a 005E5 (v01 PmRef Cpu0Cst
00003001 INTL 20050624)
[ 1.173539] ACPI: Dynamic OEM Table Load:
[ 1.173542] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 00003001 INTL
20050624) [ 1.173888] ACPI: SSDT bfe72f7c 000C4 (v01 PmRef Cpu1Ist
00003000 INTL 20050624)
[ 1.174170] ACPI: Dynamic OEM Table Load:
[ 1.174172] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 00003000 INTL
20050624) [ 1.174299] ACPI: SSDT bfe72c2f 00085 (v01 PmRef Cpu1Cst
00003000 INTL 20050624)
[ 1.174573] ACPI: Dynamic OEM Table Load:
[ 1.174575] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL
20050624) [ 1.174625] ACPI: Interpreter enabled
[ 1.174628] ACPI: (supports S0 S3 S4 S5)
[ 1.174646] ACPI: Using IOAPIC for interrupt routing
[ 1.213072] ACPI: No dock devices found.
[ 1.213077] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 1.227185] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.255620] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 1.255623] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 1.255626] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff] [ 1.255629] pci_root PNP0A03:00: host bridge
window [mem 0x000d0000-0x000dffff]
[ 1.255631] pci_root PNP0A03:00: host bridge window [mem
0xc0000000-0xf7ffffff] [ 1.255633] pci_root PNP0A03:00: host bridge
window [mem 0xfc000000-0xfebfffff]
[ 1.255636] pci_root PNP0A03:00: host bridge window [mem
0xfec10000-0xfecfffff] [ 1.255638] pci_root PNP0A03:00: host bridge
window [mem 0xfed1c000-0xfed1ffff]
[ 1.255640] pci_root PNP0A03:00: host bridge window [mem
0xfed90000-0xfed9ffff] [ 1.255642] pci_root PNP0A03:00: host bridge
window [mem 0xfeda7000-0xfedfffff]
[ 1.255645] pci_root PNP0A03:00: host bridge window [mem
0xfee10000-0xff9fffff] [ 1.255647] pci_root PNP0A03:00: host bridge
window [mem 0xffc00000-0xffdfffff]
[ 1.255650] pci_root PNP0A03:00: address space collision: host bridge
window [mem 0x40000000-0x37ffffff] conflicts with PCI mem [mem
0x00000000-0xffffffff] [ 1.255728] pci 0000:00:01.0: PME# supported from
D0 D3hot D3cold
[ 1.255731] pci 0000:00:01.0: PME# disabled
[ 1.255817] pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f]
[ 1.255880] pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f]
[ 1.255943] pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff]
[ 1.256015] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.256020] pci 0000:00:1a.7: PME# disabled
[ 1.256065] pci 0000:00:1b.0: reg 10: [mem 0xf7ffc000-0xf7ffffff 64bit]
[ 1.256127] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.256131] pci 0000:00:1b.0: PME# disabled
[ 1.256230] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.256235] pci 0000:00:1c.0: PME# disabled
[ 1.256337] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.256341] pci 0000:00:1c.1: PME# disabled
[ 1.256444] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.256449] pci 0000:00:1c.3: PME# disabled
[ 1.256552] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.256556] pci 0000:00:1c.5: PME# disabled
[ 1.256619] pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f]
[ 1.256682] pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f]
[ 1.256748] pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f]
[ 1.256811] pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff]
[ 1.256875] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.256880] pci 0000:00:1d.7: PME# disabled
[ 1.257042] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6
ACPI/GPIO/TCO [ 1.257047] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf]
claimed by ICH6 GPIO
[ 1.257051] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900
(mask 007f)
[ 1.257057] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80
(mask 003f)
[ 1.257109] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
[ 1.257117] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
[ 1.257125] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
[ 1.257132] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
[ 1.257140] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf]
[ 1.257202] pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7]
[ 1.257210] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb]
[ 1.257217] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7]
[ 1.257225] pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x6ecb]
[ 1.257232] pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff]
[ 1.257240] pci 0000:00:1f.2: reg 24: [mem 0xfed1c800-0xfed1cfff]
[ 1.257282] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.257287] pci 0000:00:1f.2: PME# disabled
[ 1.257319] pci 0000:00:1f.3: reg 10: [mem 0xf7ffbf00-0xf7ffbfff]
[ 1.257343] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df]
[ 1.257419] pci 0000:01:00.0: reg 10: [mem 0xf7efc000-0xf7efffff]
[ 1.257458] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.257463] pci 0000:01:00.0: PME# disabled
[ 1.257475] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 1.257484] pci 0000:00:01.0: PCI bridge to [bus 01-04]
[ 1.257487] pci 0000:00:01.0: bridge window [io 0xd000-0xefff]
[ 1.257490] pci 0000:00:01.0: bridge window [mem 0xf0f00000-0xf7efffff]
[ 1.257495] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff
64bit pref]
[ 1.257563] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.257566] pci 0000:02:00.0: PME# disabled
[ 1.257575] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 1.257618] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 1.257622] pci 0000:02:01.0: PME# disabled
[ 1.257630] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 1.257658] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 1.257663] pci 0000:01:00.0: bridge window [io 0xd000-0xefff]
[ 1.257667] pci 0000:01:00.0: bridge window [mem 0xf0f00000-0xf7dfffff]
[ 1.257672] pci 0000:01:00.0: bridge window [mem 0xd0000000-0xefffffff
64bit pref]
[ 1.257721] pci 0000:03:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 1.257732] pci 0000:03:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit
pref] [ 1.257744] pci 0000:03:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff
64bit] [ 1.257750] pci 0000:03:00.0: reg 24: [io 0xef00-0xef7f]
[ 1.257757] pci 0000:03:00.0: reg 30: [mem 0xf7d00000-0xf7d1ffff pref]
[ 1.264014] pci 0000:02:00.0: PCI bridge to [bus 03-03]
[ 1.264019] pci 0000:02:00.0: bridge window [io 0xe000-0xefff]
[ 1.264023] pci 0000:02:00.0: bridge window [mem 0xf4000000-0xf7dfffff]
[ 1.264029] pci 0000:02:00.0: bridge window [mem 0xd0000000-0xdfffffff
64bit pref]
[ 1.264079] pci 0000:04:00.0: reg 10: [mem 0xf1000000-0xf1ffffff]
[ 1.264091] pci 0000:04:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit
pref] [ 1.264102] pci 0000:04:00.0: reg 1c: [mem 0xf2000000-0xf3ffffff
64bit] [ 1.264108] pci 0000:04:00.0: reg 24: [io 0xdf00-0xdf7f]
[ 1.264115] pci 0000:04:00.0: reg 30: [mem 0xf0f00000-0xf0f1ffff pref]
[ 1.272010] pci 0000:02:01.0: PCI bridge to [bus 04-04]
[ 1.272016] pci 0000:02:01.0: bridge window [io 0xd000-0xdfff]
[ 1.272020] pci 0000:02:01.0: bridge window [mem 0xf0f00000-0xf3ffffff]
[ 1.272025] pci 0000:02:01.0: bridge window [mem 0xe0000000-0xefffffff
64bit pref]
[ 1.272099] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[ 1.272104] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000]
(disabled) [ 1.272109] pci 0000:00:1c.0: bridge window [mem
0xfff00000-0x000fffff] (disabled)
[ 1.272117] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
[ 1.272271] pci 0000:0c:00.0: reg 10: [mem 0xf0efe000-0xf0efffff 64bit]
[ 1.272405] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 1.272417] pci 0000:0c:00.0: PME# disabled
[ 1.280043] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[ 1.280048] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000]
(disabled) [ 1.280053] pci 0000:00:1c.1: bridge window [mem
0xf0e00000-0xf0efffff] [ 1.280061] pci 0000:00:1c.1: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 1.280169] pci 0000:0d:00.0: reg 10: [mem 0xf0d00000-0xf0dfffff 64bit]
[ 1.280277] pci 0000:0d:00.0: supports D1 D2
[ 1.280278] pci 0000:0d:00.0: PME# supported from D0 D1 D2
[ 1.280285] pci 0000:0d:00.0: PME# disabled
[ 1.280316] pci 0000:0d:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 1.280329] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[ 1.280334] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 1.280339] pci 0000:00:1c.3: bridge window [mem 0xf0c00000-0xf0dfffff]
[ 1.280347] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff
64bit pref]
[ 1.280502] pci 0000:09:00.0: reg 10: [mem 0xf0bf0000-0xf0bfffff 64bit]
[ 1.280609] pci 0000:09:00.0: PME# supported from D3hot D3cold
[ 1.280615] pci 0000:09:00.0: PME# disabled
[ 1.288056] pci 0000:00:1c.5: PCI bridge to [bus 09-09]
[ 1.288061] pci 0000:00:1c.5: bridge window [io 0xf000-0x0000]
(disabled) [ 1.288066] pci 0000:00:1c.5: bridge window [mem
0xf0b00000-0xf0bfffff] [ 1.288074] pci 0000:00:1c.5: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 1.288138] pci 0000:05:01.0: reg 10: [mem 0xf0aff800-0xf0afffff]
[ 1.288199] pci 0000:05:01.0: supports D1 D2
[ 1.288201] pci 0000:05:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.288205] pci 0000:05:01.0: PME# disabled
[ 1.288245] pci 0000:05:01.1: reg 10: [mem 0xf0aff500-0xf0aff5ff]
[ 1.288306] pci 0000:05:01.1: supports D1 D2
[ 1.288308] pci 0000:05:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.288313] pci 0000:05:01.1: PME# disabled
[ 1.288351] pci 0000:05:01.2: reg 10: [mem 0xf0aff600-0xf0aff6ff]
[ 1.288411] pci 0000:05:01.2: supports D1 D2
[ 1.288413] pci 0000:05:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.288418] pci 0000:05:01.2: PME# disabled
[ 1.288455] pci 0000:05:01.3: reg 10: [mem 0xf0aff700-0xf0aff7ff]
[ 1.288514] pci 0000:05:01.3: supports D1 D2
[ 1.288516] pci 0000:05:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.288521] pci 0000:05:01.3: PME# disabled
[ 1.288593] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive
decode) [ 1.288598] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000]
(disabled) [ 1.288603] pci 0000:00:1e.0: bridge window [mem
0xf0a00000-0xf0afffff] [ 1.288611] pci 0000:00:1e.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 1.288613] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 1.288615] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 1.288618] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[ 1.288620] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff]
(subtractive decode)
[ 1.288622] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xf7ffffff]
(subtractive decode)
[ 1.288625] pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfebfffff]
(subtractive decode)
[ 1.288627] pci 0000:00:1e.0: bridge window [mem 0xfec10000-0xfecfffff]
(subtractive decode)
[ 1.288629] pci 0000:00:1e.0: bridge window [mem 0xfed1c000-0xfed1ffff]
(subtractive decode)
[ 1.288631] pci 0000:00:1e.0: bridge window [mem 0xfed90000-0xfed9ffff]
(subtractive decode)
[ 1.288633] pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff]
(subtractive decode)
[ 1.288636] pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff]
(subtractive decode)
[ 1.288638] pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffdfffff]
(subtractive decode)
[ 1.288673] pci_bus 0000:00: on NUMA node 0
[ 1.288680] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.288967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 1.289092] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 1.289152] ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.AGP_.SLI_.SLI0._PRT] [ 1.289218] ACPI: PCI Interrupt Routing
Table [\_SB_.PCI0.AGP_.SLI_.SLI1._PRT]
[ 1.289278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.289348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.289420] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.289492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 1.301754] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7
[ 1.301862] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 1.301966] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
[ 1.302072] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[ 1.302177] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12
14 15)
[ 1.302284] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12
14 15)
[ 1.302392] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12
14 15)
[ 1.302486] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12
14 15) *0, disabled.
[ 1.302535] HEST: Table is not found!
[ 1.302621] vgaarb: device added:
PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.302628]
vgaarb: loaded
[ 1.302766] SCSI subsystem initialized
[ 1.302829] libata version 3.00 loaded.
[ 1.302873] usbcore: registered new interface driver usbfs
[ 1.302884] usbcore: registered new interface driver hub
[ 1.302909] usbcore: registered new device driver usb
[ 1.303108] ACPI: WMI: Mapper loaded
[ 1.303110] PCI: Using ACPI for IRQ routing
[ 1.303112] PCI: pci_cache_line_size set to 64 bytes
[ 1.303367] reserve RAM buffer: 0000000000002000 - 000000000000ffff
[ 1.303369] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 1.303371] reserve RAM buffer: 00000000bfe72000 - 00000000bfffffff
[ 1.303448] NetLabel: Initializing
[ 1.303450] NetLabel: domain hash size = 128
[ 1.303451] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.303462] NetLabel: unlabeled traffic allowed by default
[ 1.303487] HPET: 3 timers in total, 0 timers will be used for per-cpu
timer [ 1.303494] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.303499] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 1.884040] Switching to clocksource tsc
[ 1.894569] AppArmor: AppArmor Filesystem Enabled
[ 1.894593] pnp: PnP ACPI init
[ 1.894619] ACPI: bus type pnp registered
[ 1.910557] pnp 00:09: disabling [io 0x1000-0x1005] because it overlaps
0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 1.910562] pnp 00:09: disabling [io 0x1008-0x100f] because it overlaps
0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 1.910656] pnp 00:0a: disabling [io 0x1006-0x1007] because it overlaps
0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 1.910659] pnp 00:0a: disabling [io 0x100a-0x1059] because it overlaps
0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 1.910662] pnp 00:0a: disabling [io 0x1010-0x102f] because it overlaps
0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 1.929911] pnp: PnP ACPI: found 12 devices
[ 1.929915] ACPI: ACPI bus type pnp unregistered
[ 1.929919] PnPBIOS: Disabled by ACPI PNP
[ 1.929933] system 00:05: [io 0x0c80-0x0cff] could not be reserved
[ 1.929940] system 00:08: [mem 0xfed00000-0xfed003ff] has been reserved
[ 1.929946] system 00:09: [io 0x0900-0x097f] has been reserved
[ 1.929948] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 1.929953] system 00:0a: [io 0xf400-0xf4fe] has been reserved
[ 1.929956] system 00:0a: [io 0x1080-0x10bf] has been reserved
[ 1.929958] system 00:0a: [io 0x10c0-0x10df] has been reserved
[ 1.929961] system 00:0a: [io 0x0809] has been reserved
[ 1.929966] system 00:0b: [mem 0x00000000-0x0009efff] could not be
reserved [ 1.929968] system 00:0b: [mem 0x0009f000-0x0009ffff] could not
be reserved
[ 1.929971] system 00:0b: [mem 0x000c0000-0x000cffff] could not be
reserved [ 1.929973] system 00:0b: [mem 0x000e0000-0x000fffff] could not
be reserved
[ 1.929975] system 00:0b: [mem 0x00100000-0xbfe71fff] could not be
reserved [ 1.929978] system 00:0b: [mem 0xbfe72000-0xbfefffff] has been
reserved [ 1.929980] system 00:0b: [mem 0xbff00000-0xbfffffff] has been
reserved [ 1.929983] system 00:0b: [mem 0xffe00000-0xffffffff] has been
reserved [ 1.929985] system 00:0b: [mem 0xffa00000-0xffbfffff] has been
reserved [ 1.929988] system 00:0b: [mem 0xfec00000-0xfec0ffff] could not
be reserved
[ 1.929990] system 00:0b: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 1.929992] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 1.929995] system 00:0b: [mem 0xfeda0000-0xfeda3fff] has been reserved
[ 1.929997] system 00:0b: [mem 0xfeda4000-0xfeda4fff] has been reserved
[ 1.929999] system 00:0b: [mem 0xfeda5000-0xfeda5fff] has been reserved
[ 1.930002] system 00:0b: [mem 0xfeda6000-0xfeda6fff] has been reserved
[ 1.930004] system 00:0b: [mem 0xfed1c800-0xfed1cfff] has been reserved
[ 1.930007] system 00:0b: [mem 0xfed18000-0xfed1bfff] has been reserved
[ 1.930009] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.965885] pci 0000:00:1c.0: BAR 14: assigned [mem
0xc0000000-0xc01fffff] [ 1.965890] pci 0000:00:1c.0: BAR 15: assigned
[mem 0xc0200000-0xc03fffff 64bit pref]
[ 1.965893] pci 0000:00:1c.1: BAR 15: assigned [mem
0xc0400000-0xc05fffff 64bit pref]
[ 1.965896] pci 0000:00:1c.5: BAR 15: assigned [mem
0xc0600000-0xc07fffff 64bit pref]
[ 1.965900] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 1.965902] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 1.965905] pci 0000:00:1c.5: BAR 13: assigned [io 0x4000-0x4fff]
[ 1.965908] pci 0000:02:00.0: PCI bridge to [bus 03-03]
[ 1.965911] pci 0000:02:00.0: bridge window [io 0xe000-0xefff]
[ 1.965916] pci 0000:02:00.0: bridge window [mem 0xf4000000-0xf7dfffff]
[ 1.965919] pci 0000:02:00.0: bridge window [mem 0xd0000000-0xdfffffff
64bit pref]
[ 1.965925] pci 0000:02:01.0: PCI bridge to [bus 04-04]
[ 1.965928] pci 0000:02:01.0: bridge window [io 0xd000-0xdfff]
[ 1.965932] pci 0000:02:01.0: bridge window [mem 0xf0f00000-0xf3ffffff]
[ 1.965936] pci 0000:02:01.0: bridge window [mem 0xe0000000-0xefffffff
64bit pref]
[ 1.965942] pci 0000:01:00.0: PCI bridge to [bus 02-04]
[ 1.965945] pci 0000:01:00.0: bridge window [io 0xd000-0xefff]
[ 1.965949] pci 0000:01:00.0: bridge window [mem 0xf0f00000-0xf7dfffff]
[ 1.965953] pci 0000:01:00.0: bridge window [mem 0xd0000000-0xefffffff
64bit pref]
[ 1.965959] pci 0000:00:01.0: PCI bridge to [bus 01-04]
[ 1.965961] pci 0000:00:01.0: bridge window [io 0xd000-0xefff]
[ 1.965965] pci 0000:00:01.0: bridge window [mem 0xf0f00000-0xf7efffff]
[ 1.965968] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff
64bit pref]
[ 1.965972] pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
[ 1.965976] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.965982] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 1.965987] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff
64bit pref]
[ 1.965994] pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
[ 1.965998] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 1.966004] pci 0000:00:1c.1: bridge window [mem 0xf0e00000-0xf0efffff]
[ 1.966009] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff
64bit pref]
[ 1.966017] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[ 1.966020] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 1.966026] pci 0000:00:1c.3: bridge window [mem 0xf0c00000-0xf0dfffff]
[ 1.966031] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf01fffff
64bit pref]
[ 1.966039] pci 0000:00:1c.5: PCI bridge to [bus 09-09]
[ 1.966042] pci 0000:00:1c.5: bridge window [io 0x4000-0x4fff]
[ 1.966048] pci 0000:00:1c.5: bridge window [mem 0xf0b00000-0xf0bfffff]
[ 1.966053] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc07fffff
64bit pref]
[ 1.966061] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 1.966063] pci 0000:00:1e.0: bridge window [io disabled]
[ 1.966069] pci 0000:00:1e.0: bridge window [mem 0xf0a00000-0xf0afffff]
[ 1.966073] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.966090] alloc irq_desc for 16 on node -1
[ 1.966092] alloc kstat_irqs on node -1
[ 1.966099] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.966102] pci 0000:00:01.0: setting latency timer to 64
[ 1.966113] pci 0000:01:00.0: setting latency timer to 64
[ 1.966122] pci 0000:02:00.0: setting latency timer to 64
[ 1.966131] pci 0000:02:01.0: setting latency timer to 64
[ 1.966140] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.966145] pci 0000:00:1c.0: setting latency timer to 64
[ 1.966156] alloc irq_desc for 17 on node -1
[ 1.966157] alloc kstat_irqs on node -1
[ 1.966161] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.966165] pci 0000:00:1c.1: setting latency timer to 64
[ 1.966176] alloc irq_desc for 19 on node -1
[ 1.966178] alloc kstat_irqs on node -1
[ 1.966181] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.966185] pci 0000:00:1c.3: setting latency timer to 64
[ 1.966196] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.966201] pci 0000:00:1c.5: setting latency timer to 64
[ 1.966210] pci 0000:00:1e.0: setting latency timer to 64
[ 1.966214] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.966216] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.966218] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.966220] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.966222] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xf7ffffff]
[ 1.966224] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfebfffff]
[ 1.966226] pci_bus 0000:00: resource 10 [mem 0xfec10000-0xfecfffff]
[ 1.966229] pci_bus 0000:00: resource 11 [mem 0xfed1c000-0xfed1ffff]
[ 1.966231] pci_bus 0000:00: resource 12 [mem 0xfed90000-0xfed9ffff]
[ 1.966233] pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff]
[ 1.966235] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff]
[ 1.966237] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff]
[ 1.966239] pci_bus 0000:01: resource 0 [io 0xd000-0xefff]
[ 1.966241] pci_bus 0000:01: resource 1 [mem 0xf0f00000-0xf7efffff]
[ 1.966243] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit
pref] [ 1.966245] pci_bus 0000:02: resource 0 [io 0xd000-0xefff]
[ 1.966247] pci_bus 0000:02: resource 1 [mem 0xf0f00000-0xf7dfffff]
[ 1.966249] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xefffffff 64bit
pref] [ 1.966252] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 1.966254] pci_bus 0000:03: resource 1 [mem 0xf4000000-0xf7dfffff]
[ 1.966256] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit
pref] [ 1.966258] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 1.966260] pci_bus 0000:04: resource 1 [mem 0xf0f00000-0xf3ffffff]
[ 1.966262] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xefffffff 64bit
pref] [ 1.966264] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff]
[ 1.966266] pci_bus 0000:0b: resource 1 [mem 0xc0000000-0xc01fffff]
[ 1.966268] pci_bus 0000:0b: resource 2 [mem 0xc0200000-0xc03fffff 64bit
pref] [ 1.966270] pci_bus 0000:0c: resource 0 [io 0x3000-0x3fff]
[ 1.966272] pci_bus 0000:0c: resource 1 [mem 0xf0e00000-0xf0efffff]
[ 1.966275] pci_bus 0000:0c: resource 2 [mem 0xc0400000-0xc05fffff 64bit
pref] [ 1.966277] pci_bus 0000:0d: resource 0 [io 0xc000-0xcfff]
[ 1.966279] pci_bus 0000:0d: resource 1 [mem 0xf0c00000-0xf0dfffff]
[ 1.966281] pci_bus 0000:0d: resource 2 [mem 0xf0000000-0xf01fffff 64bit
pref] [ 1.966283] pci_bus 0000:09: resource 0 [io 0x4000-0x4fff]
[ 1.966285] pci_bus 0000:09: resource 1 [mem 0xf0b00000-0xf0bfffff]
[ 1.966287] pci_bus 0000:09: resource 2 [mem 0xc0600000-0xc07fffff 64bit
pref] [ 1.966289] pci_bus 0000:05: resource 1 [mem
0xf0a00000-0xf0afffff] [ 1.966291] pci_bus 0000:05: resource 4 [io
0x0000-0x0cf7] [ 1.966293] pci_bus 0000:05: resource 5 [io
0x0d00-0xffff] [ 1.966295] pci_bus 0000:05: resource 6 [mem
0x000a0000-0x000bffff] [ 1.966297] pci_bus 0000:05: resource 7 [mem
0x000d0000-0x000dffff] [ 1.966299] pci_bus 0000:05: resource 8 [mem
0xc0000000-0xf7ffffff] [ 1.966301] pci_bus 0000:05: resource 9 [mem
0xfc000000-0xfebfffff] [ 1.966303] pci_bus 0000:05: resource 10 [mem
0xfec10000-0xfecfffff] [ 1.966305] pci_bus 0000:05: resource 11 [mem
0xfed1c000-0xfed1ffff] [ 1.966307] pci_bus 0000:05: resource 12 [mem
0xfed90000-0xfed9ffff] [ 1.966309] pci_bus 0000:05: resource 13 [mem
0xfeda7000-0xfedfffff] [ 1.966311] pci_bus 0000:05: resource 14 [mem
0xfee10000-0xff9fffff] [ 1.966313] pci_bus 0000:05: resource 15 [mem
0xffc00000-0xffdfffff] [ 1.966349] NET: Registered protocol family 2
[ 1.966406] IP route cache hash table entries: 32768 (order: 5, 131072
bytes) [ 1.966619] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 1.966940] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.967095] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.967097] TCP reno registered
[ 1.967100] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.967107] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.967162] NET: Registered protocol family 1
[ 1.967366] pci 0000:03:00.0: Boot video device
[ 1.967458] PCI: CLS 64 bytes, default 64
[ 1.967479] Simple Boot Flag at 0x79 set to 0x1
[ 1.967622] cpufreq-nforce2: No nForce2 chipset.
[ 1.967648] Scanning for low memory corruption every 60 seconds
[ 1.967751] audit: initializing netlink socket (disabled)
[ 1.967758] type=2000 audit(1301128394.964:1): initialized
[ 1.976663] highmem bounce pool size: 64 pages
[ 1.976667] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.977916] VFS: Disk quotas dquot_6.5.2
[ 1.977968] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.978459] fuse init (API version 7.14)
[ 1.978534] msgmni has been set to 1656
[ 1.979864] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 1.979867] io scheduler noop registered
[ 1.979868] io scheduler deadline registered
[ 1.979879] io scheduler cfq registered (default)
[ 1.979994] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.980032] alloc irq_desc for 40 on node -1
[ 1.980034] alloc kstat_irqs on node -1
[ 1.980042] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.980108] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.980154] alloc irq_desc for 41 on node -1
[ 1.980156] alloc kstat_irqs on node -1
[ 1.980164] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 1.980262] pcieport 0000:00:1c.1: setting latency timer to 64
[ 1.980308] alloc irq_desc for 42 on node -1
[ 1.980310] alloc kstat_irqs on node -1
[ 1.980318] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 1.980415] pcieport 0000:00:1c.3: setting latency timer to 64
[ 1.980462] alloc irq_desc for 43 on node -1
[ 1.980463] alloc kstat_irqs on node -1
[ 1.980471] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 1.980566] pcieport 0000:00:1c.5: setting latency timer to 64
[ 1.980613] alloc irq_desc for 44 on node -1
[ 1.980614] alloc kstat_irqs on node -1
[ 1.980622] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 1.980754] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.980862] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.980938] intel_idle: MWAIT substates: 0x3122220
[ 1.980940] intel_idle: does not run on family 6 model 23
[ 1.981046] ACPI: AC Adapter [AC] (on-line)
[ 1.981111] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 1.981574]
ACPI: Lid Switch [LID]
[ 1.981615] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 1.981620]
ACPI: Power Button [PBTN]
[ 1.981659] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 1.981662]
ACPI: Sleep Button [SBTN]
[ 1.981915] ACPI: acpi_idle registered with cpuidle
[ 1.982056] Monitor-Mwait will be used to enter C-1 state
[ 1.982075] Monitor-Mwait will be used to enter C-2 state
[ 1.982094] Monitor-Mwait will be used to enter C-3 state
[ 1.982099] Marking TSC unstable due to TSC halts in idle
[ 1.982179] Switching to clocksource hpet
[ 2.145183] Freeing initrd memory: 11144k freed
[ 2.157006] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.157015] ACPI: Thermal Zone [THM] (44 C)
[ 2.157095] ERST: Table is not found!
[ 2.157107] ACPI: Battery Slot [BAT0] (battery absent)
[ 2.157121] isapnp: Scanning for PnP cards...
[ 2.157444] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.158788] brd: module loaded
[ 2.159255] loop: module loaded
[ 2.159417] ata_piix 0000:00:1f.1: version 2.13
[ 2.159431] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 2.159474] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.159564] scsi0 : ata_piix
[ 2.159630] scsi1 : ata_piix
[ 2.160158] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq
14 [ 2.160160] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8
irq 15
[ 2.160460] Fixed MDIO Bus: probed
[ 2.160488] PPP generic driver version 2.4.2
[ 2.160518] tun: Universal TUN/TAP device driver, 1.6
[ 2.160520] tun: (C) 1999-2004 Max Krasnyansky <maxk at qualcomm.com>
[ 2.160595] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.160613] alloc irq_desc for 22 on node -1
[ 2.160615] alloc kstat_irqs on node -1
[ 2.160620] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) ->
IRQ 22
[ 2.160633] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.160636] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.160664] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 2.160696] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.164590] ehci_hcd 0000:00:1a.7: cache line size of 64 is not
supported [ 2.164605] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 2.168667] ata2: port disabled. ignoring.
[ 2.180015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.180130] hub 1-0:1.0: USB hub found
[ 2.180135] hub 1-0:1.0: 4 ports detected
[ 2.180206] alloc irq_desc for 20 on node -1
[ 2.180208] alloc kstat_irqs on node -1
[ 2.180212] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 2.180221] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.180224] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.180252] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 2.180281] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.184182] ehci_hcd 0000:00:1d.7: cache line size of 64 is not
supported [ 2.184195] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 2.200014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.200098] hub 2-0:1.0: USB hub found
[ 2.200102] hub 2-0:1.0: 6 ports detected
[ 2.200175] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.200189] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.200205] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 2.200212] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.200215] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.200241] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 2.200268] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[ 2.200373] hub 3-0:1.0: USB hub found
[ 2.200377] hub 3-0:1.0: 2 ports detected
[ 2.200435] alloc irq_desc for 21 on node -1
[ 2.200437] alloc kstat_irqs on node -1
[ 2.200441] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) ->
IRQ 21
[ 2.200447] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.200450] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.200476] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 2.200510] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[ 2.200612] hub 4-0:1.0: USB hub found
[ 2.200615] hub 4-0:1.0: 2 ports detected
[ 2.200680] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 2.200686] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.200689] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.200719] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 5
[ 2.200745] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[ 2.200849] hub 5-0:1.0: USB hub found
[ 2.200853] hub 5-0:1.0: 2 ports detected
[ 2.200917] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) ->
IRQ 21
[ 2.200923] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.200927] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.200953] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 6
[ 2.200979] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[ 2.201084] hub 6-0:1.0: USB hub found
[ 2.201087] hub 6-0:1.0: 2 ports detected
[ 2.201146] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) ->
IRQ 22
[ 2.201152] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.201155] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.201187] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 7
[ 2.201213] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 2.201320] hub 7-0:1.0: USB hub found
[ 2.201323] hub 7-0:1.0: 2 ports detected
[ 2.201440] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 2.204504] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.204509] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.204559] mice: PS/2 mouse device common for all mice
[ 2.204667] rtc_cmos 00:03: RTC can wake from S4
[ 2.204696] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.204727] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet
irqs [ 2.204812] device-mapper: uevent: version 1.0.3
[ 2.204899] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised:
dm-devel at redhat.com [ 2.204959] device-mapper: multipath: version 1.1.1
loaded [ 2.204962] device-mapper: multipath round-robin: version 1.0.0
loaded [ 2.205058] EISA: Probing bus 0 at eisa.0
[ 2.205061] EISA: Cannot allocate resource for mainboard
[ 2.205063] Cannot allocate resource for EISA slot 1
[ 2.205064] Cannot allocate resource for EISA slot 2
[ 2.205066] Cannot allocate resource for EISA slot 3
[ 2.205068] Cannot allocate resource for EISA slot 4
[ 2.205069] Cannot allocate resource for EISA slot 5
[ 2.205071] Cannot allocate resource for EISA slot 6
[ 2.205073] Cannot allocate resource for EISA slot 7
[ 2.205074] Cannot allocate resource for EISA slot 8
[ 2.205076] EISA: Detected 0 cards.
[ 2.205195] cpuidle: using governor ladder
[ 2.205282] cpuidle: using governor menu
[ 2.205549] TCP cubic registered
[ 2.205659] NET: Registered protocol family 10
[ 2.205975] lo: Disabled Privacy Extensions
[ 2.206175] NET: Registered protocol family 17
[ 2.207176] Using IPI No-Shortcut mode
[ 2.207237] PM: Resume from disk failed.
[ 2.207248] registered taskstats version 1
[ 2.207759] Magic number: 3:810:574
[ 2.207842] rtc_cmos 00:03: setting system clock to 2011-03-26 08:33:15
UTC (1301128395)
[ 2.207845] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.207846] EDD information not available.
[ 2.251287] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input3 [ 2.336424] ata1.00: ATAPI:
HL-DT-ST DVD+/-RW GSA-T21N, A102, max UDMA/33
[ 2.352307] ata1.00: configured for UDMA/33
[ 2.511039] isapnp: No Plug & Play device found
[ 2.514554] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-T21N A102 PQ: 0
ANSI: 5
[ 2.518445] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda
tray [ 2.518450] Uniform CD-ROM driver Revision: 3.20
[ 2.518590] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.518633] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 2.518723] Freeing unused kernel memory: 684k freed
[ 2.519174] Write protecting the kernel text: 4932k
[ 2.519226] Write protecting the kernel read-only data: 1976k
[ 2.536111] udev[91]: starting version 163
[ 2.588560] tg3.c:v3.110 (April 9, 2010)
[ 2.588622] tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.588632] tg3 0000:09:00.0: setting latency timer to 64
[ 2.606002] Linux agpgart interface v0.103
[ 2.647371] sdhci: Secure Digital Host Controller Interface driver
[ 2.647374] sdhci: Copyright(c) Pierre Ossman
[ 2.648524] sdhci-pci 0000:05:01.1: SDHCI controller found [1180:0822]
(rev 22)
[ 2.648543] alloc irq_desc for 18 on node -1
[ 2.648545] alloc kstat_irqs on node -1
[ 2.648552] sdhci-pci 0000:05:01.1: PCI INT B -> GSI 18 (level, low) ->
IRQ 18
[ 2.650612] Registered led device: mmc0::
[ 2.652620] ahci 0000:00:1f.2: version 3.0
[ 2.652633] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ
17 [ 2.652668] alloc irq_desc for 45 on node -1
[ 2.652670] alloc kstat_irqs on node -1
[ 2.652679] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 2.652746] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps
0x5 impl SATA mode
[ 2.652749] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum
part ccc ems
[ 2.652754] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.670010] tg3 0000:09:00.0: eth0: Tigon3 [partno(BCM95754m) rev b002]
(PCI Express) MAC address 00:1d:09:5b:7d:60
[ 2.670014] tg3 0000:09:00.0: eth0: attached PHY is 5787
(10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 2.670017] tg3 0000:09:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0]
ASF[0] TSOcap[1]
[ 2.670019] tg3 0000:09:00.0: eth0: dma_rwctrl[76180000]
dma_mask[64-bit] [ 2.670190] mmc0: SDHCI controller on PCI
[0000:05:01.1] using DMA
[ 2.670483] firewire_ohci 0000:05:01.0: PCI INT A -> GSI 19 (level, low)
-> IRQ 19
[ 2.700583] scsi2 : ahci
[ 2.712221] [drm] Initialized drm 1.1.0 20060810
[ 2.716140] scsi3 : ahci
[ 2.716792] scsi4 : ahci
[ 2.718279] ata3: SATA max UDMA/133 abar m2048 at 0xfed1c800 port
0xfed1c900 irq 45
[ 2.718282] ata4: DUMMY
[ 2.718285] ata5: SATA max UDMA/133 abar m2048 at 0xfed1c800 port
0xfed1ca00 irq 45
[ 2.718664] acpi device:32: registered as cooling_device2
[ 2.719380] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2d/device:2e/device:2f/LNXVIDEO:00/input/input4
[ 2.719454] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 2.719503] ACPI Warning for \_SB_.PCI0.AGP_.SLI_.SLI1.VID1._DOD: Return
Package has no elements (empty) (20100428/nspredef-456)
[ 2.719588] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:2d/device:2e/device:34/LNXVIDEO:01/input/input5
[ 2.719640] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 2.765049] firewire_ohci: Added fw-ohci device 0000:05:01.0, OHCI
v1.10, 4 IR + 4 IT contexts, quirks 0x0
[ 2.772054] usb 2-6: new high speed USB device using ehci_hcd and
address 3
[ 2.838973] nouveau 0000:03:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 2.838978] nouveau 0000:03:00.0: setting latency timer to 64
[ 2.840894] [drm] nouveau 0000:03:00.0: Detected an NV50 generation card
(0x084900a2) [ 2.844132] [drm] nouveau 0000:03:00.0: Attempting to load
BIOS image from PRAMIN
[ 2.929553] [drm] nouveau 0000:03:00.0: ... appears to be valid
[ 2.929556] [drm] nouveau 0000:03:00.0: BIT BIOS found
[ 2.929558] [drm] nouveau 0000:03:00.0: Bios version 60.84.6a.00
[ 2.929561] [drm] nouveau 0000:03:00.0: TMDS table revision 2.0 not
currently supported
[ 2.929563] [drm] nouveau 0000:03:00.0: Found Display Configuration
Block version 4.0
[ 2.929565] [drm] nouveau 0000:03:00.0: Raw DCB entry 0: 01000323
00010034 [ 2.929567] [drm] nouveau 0000:03:00.0: Raw DCB entry 1:
02011300 00000028
[ 2.929569] [drm] nouveau 0000:03:00.0: Raw DCB entry 2: 02021302
00000030 [ 2.929571] [drm] nouveau 0000:03:00.0: Raw DCB entry 3:
010323f1 00c0c080
[ 2.929573] [drm] nouveau 0000:03:00.0: Raw DCB entry 4: 0000000e
00000000 [ 2.929575] [drm] nouveau 0000:03:00.0: DCB connector table:
VHER 0x40 5 14 2
[ 2.929577] [drm] nouveau 0000:03:00.0: 0: 0x00000041: type 0x41 idx 0
tag 0xff
[ 2.929579] [drm] nouveau 0000:03:00.0: unknown type, using 0x40
[ 2.929581] [drm] nouveau 0000:03:00.0: 1: 0x00001130: type 0x30 idx 1
tag 0x07
[ 2.929583] [drm] nouveau 0000:03:00.0: 2: 0x00000210: type 0x10 idx 2
tag 0xff
[ 2.929585] [drm] nouveau 0000:03:00.0: 3: 0x00000211: type 0x11 idx 3
tag 0xff
[ 2.929587] [drm] nouveau 0000:03:00.0: 4: 0x00000213: type 0x13 idx 4
tag 0xff
[ 2.929594] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 0 at
offset 0xC86E
[ 2.972168] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 1 at
offset 0xCBF2
[ 3.008046] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 2 at
offset 0xD642
[ 3.008058] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 3 at
offset 0xD734
[ 3.016126] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 4 at
offset 0xD967
[ 3.019375] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table at
offset 0xD9CC
[ 3.036093] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.036122] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.040079] [drm] nouveau 0000:03:00.0: 0xD9CC: Condition still not met
after 20ms, skipping following opcodes
[ 3.040090] [drm] nouveau 0000:03:00.0: 0xB8A4: parsing output script 0
[ 3.040095] [drm] nouveau 0000:03:00.0: 0xBA1A: parsing output script 0
[ 3.040099] [drm] nouveau 0000:03:00.0: 0xB092: parsing output script 0
[ 3.040110] [drm] nouveau 0000:03:00.0: Detected 256MiB VRAM
[ 3.149050] usb 3-2: new full speed USB device using uhci_hcd and
address 2
[ 3.170839] [TTM] Zone kernel: Available graphics memory: 429880 kiB.
[ 3.170841] [TTM] Zone highmem: Available graphics memory: 1547296 kiB.
[ 3.170843] [TTM] Initializing pool allocator.
[ 3.209325] [drm] nouveau 0000:03:00.0: 512 MiB GART (aperture)
[ 3.211350] [drm] nouveau 0000:03:00.0: Allocating FIFO number 1
[ 3.219493] [drm] nouveau 0000:03:00.0: nouveau_channel_alloc:
initialised FIFO 1
[ 3.220433] [drm] nouveau 0000:03:00.0: Detected a LVDS output
[ 3.220438] [drm] nouveau 0000:03:00.0: Detected a DAC output
[ 3.220440] [drm] nouveau 0000:03:00.0: Detected a TMDS output
[ 3.220442] [drm] nouveau 0000:03:00.0: DCB encoder 1 unknown
[ 3.220444] [drm] nouveau 0000:03:00.0: Detected a LVDS connector
[ 3.320913] [drm] nouveau 0000:03:00.0: Detected a DVI-I connector
[ 3.320974] firewire_core: created device fw0: GUID 474fc0002cb27038,
S400 [ 3.320977] [drm] nouveau 0000:03:00.0: Detected a TV connector
[ 3.320980] [drm] nouveau 0000:03:00.0: no encoders, ignoring
[ 3.329363] hub 3-2:1.0: USB hub found
[ 3.331334] hub 3-2:1.0: 3 ports detected
[ 3.404740] ata3.00: ATA-8: WDC WD3200BEVT-75ZCT1, 11.01A11, max
UDMA/133 [ 3.404744] ata3.00: 625142448 sectors, multi 8: LBA48 NCQ
(depth 31/32), AA
[ 3.405744] ata3.00: configured for UDMA/133
[ 3.424114] scsi 2:0:0:0: Direct-Access ATA WDC WD3200BEVT-7 11.0 PQ: 0
ANSI: 5
[ 3.424228] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.424392] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320
GB/298 GiB)
[ 3.424438] sd 2:0:0:0: [sda] Write Protect is off
[ 3.424441] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.424461] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.424579] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 3.473635] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.576157] usb 4-1: new full speed USB device using uhci_hcd and
address 2
[ 3.766014] usbcore: registered new interface driver hiddev
[ 3.774764] generic-usb 0003:046D:C251.0001: hiddev96,hidraw0: USB HID
v1.11 Device [GamePanel LCD] on usb-0000:00:1a.1-1/input0
[ 3.774914] usbcore: registered new interface driver usbhid
[ 3.774916] usbhid: USB HID core driver
[ 3.996028] usb 6-2: new low speed USB device using uhci_hcd and address
2 [ 4.205480] input: Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM) as
/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input6 [
4.205551] generic-usb 0003:045E:0040.0002: input,hidraw1: USB HID v1.10
Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on
usb-0000:00:1d.1-2/input0 [ 4.285321] usb 3-2.1: new full speed USB
device using uhci_hcd and address 3
[ 4.378160] [drm] nouveau 0000:03:00.0: allocated 1920x1200 fb:
0x40250000, bo c105de00
[ 4.380363] [drm] nouveau 0000:03:00.0: 0xB8A8: parsing output script 1
[ 4.380389] [drm] nouveau 0000:03:00.0: 0xB751: parsing clock script 0
[ 4.383509] Console: switching to colour frame buffer device 240x75
[ 4.387710] fb0: nouveaufb frame buffer device
[ 4.387711] drm: registered panic notifier
[ 4.387716] Slow work thread pool: Starting up
[ 4.387815] Slow work thread pool: Ready
[ 4.387821] [drm] Initialized nouveau 0.0.16 20090420 for 0000:03:00.0
on minor 0
[ 4.387844] nouveau 0000:04:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 4.387850] nouveau 0000:04:00.0: setting latency timer to 64
[ 4.389792] [drm] nouveau 0000:04:00.0: Detected an NV50 generation card
(0x084900a2) [ 4.393205] [drm] nouveau 0000:04:00.0: Attempting to load
BIOS image from PRAMIN
[ 4.393213] [drm] nouveau 0000:04:00.0: ... BIOS signature not found
[ 4.393215] [drm] nouveau 0000:04:00.0: Attempting to load BIOS image
from PROM
[ 4.498355] usb 3-2.2: new full speed USB device using uhci_hcd and
address 4
[ 4.579952] [drm] nouveau 0000:04:00.0: ... appears to be valid
[ 4.579955] [drm] nouveau 0000:04:00.0: BIT BIOS found
[ 4.579958] [drm] nouveau 0000:04:00.0: Bios version 60.84.6a.00
[ 4.579960] [drm] nouveau 0000:04:00.0: TMDS table revision 2.0 not
currently supported
[ 4.579963] [drm] nouveau 0000:04:00.0: Found Display Configuration
Block version 4.0
[ 4.579965] [drm] nouveau 0000:04:00.0: Raw DCB entry 0: 01000323
00010034 [ 4.579968] [drm] nouveau 0000:04:00.0: Raw DCB entry 1:
0000000e 00000000
[ 4.579971] [drm] nouveau 0000:04:00.0: DCB connector table: VHER 0x40 5
14 2
[ 4.579973] [drm] nouveau 0000:04:00.0: 0: 0x00000041: type 0x41 idx 0
tag 0xff
[ 4.579975] [drm] nouveau 0000:04:00.0: unknown type, using 0x40
[ 4.579984] [drm] nouveau 0000:04:00.0: Adaptor not initialised
[ 4.579986] [drm] nouveau 0000:04:00.0: Running VBIOS init tables
[ 4.579991] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at
offset 0xC86E
[ 4.600082] [drm] nouveau 0000:03:00.0: 0xB867: parsing clock script 1
[ 4.625172] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at
offset 0xCBF2
[ 4.639762] input: Broadcom Corp as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input7 [
4.639822] generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11
Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[ 4.661022] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at
offset 0xD642
[ 4.661064] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at
offset 0xD734
[ 4.668143] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at
offset 0xD967
[ 4.673781] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at
offset 0xD9CC
[ 4.697361] [drm] nouveau 0000:04:00.0: 0xB8A4: parsing output script 0
[ 4.697396] [drm] nouveau 0000:04:00.0: Detected 256MiB VRAM
[ 4.713332] usb 3-2.3: new full speed USB device using uhci_hcd and
address 5
[ 4.857152] input: Broadcom Corp as
/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input8 [
4.861207] generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11
Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[ 4.866700] [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture)
[ 4.868683] [drm] nouveau 0000:04:00.0: Allocating FIFO number 1
[ 4.876830] [drm] nouveau 0000:04:00.0: nouveau_channel_alloc:
initialised FIFO 1
[ 4.877766] [drm] nouveau 0000:04:00.0: Detected a LVDS output
[ 4.877771] [drm] nouveau 0000:04:00.0: Detected a LVDS connector
[ 4.881721] [drm] nouveau 0000:04:00.0: LVDS present in DCB table, but
couldn't determine its native mode. Disabling.
[ 4.881878] No connectors reported connected with modes
[ 4.881881] [drm] Cannot find any crtc or sizes - going 1024x768
[ 4.882253] [drm] nouveau 0000:04:00.0: allocated 1024x768 fb:
0x40250000, bo f6bf5600
[ 4.882315] fb1: nouveaufb frame buffer device
[ 4.882319] [drm] Initialized nouveau 0.0.16 20090420 for 0000:04:00.0
on minor 1
[ 5.183420] Btrfs loaded
[ 5.187501] xor: automatically using best checksumming function:
pIII_sse [ 5.204024] pIII_sse : 9933.000 MB/sec
[ 5.204027] xor: using function: pIII_sse (9933.000 MB/sec)
[ 5.206098] device-mapper: dm-raid45: initialized v0.2594b
[ 5.942901] EXT3-fs (sda5): recovery required on readonly filesystem
[ 5.942905] EXT3-fs (sda5): write access will be enabled during recovery
[ 5.987520] EXT3-fs: barriers not enabled
[ 17.295132] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 17.295138] ata3.00: irq_stat 0x40000008
[ 17.295144] ata3.00: failed command: READ FPDMA QUEUED
[ 17.295155] ata3.00: cmd 60/00:00:97:01:de/01:00:16:00:00/40 tag 0 ncq
131072 in
[ 17.295157] res 41/40:00:1b:02:de/00:00:16:00:00/40 Emask 0x409 (media
error) <F>
[ 17.295162] ata3.00: status: { DRDY ERR }
[ 17.295166] ata3.00: error: { UNC }
[ 17.297192] ata3.00: configured for UDMA/133
[ 17.297205] ata3: EH complete
[ 21.219940] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 21.219945] ata3.00: irq_stat 0x40000008
[ 21.219951] ata3.00: failed command: READ FPDMA QUEUED
[ 21.219961] ata3.00: cmd 60/00:00:97:01:de/01:00:16:00:00/40 tag 0 ncq
131072 in
[ 21.219963] res 41/40:00:17:02:de/00:00:16:00:00/40 Emask 0x409 (media
error) <F>
[ 21.219968] ata3.00: status: { DRDY ERR }
[ 21.219972] ata3.00: error: { UNC }
[ 21.221988] ata3.00: configured for UDMA/133
[ 21.221998] ata3: EH complete
[ 26.912589] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 26.912594] ata3.00: irq_stat 0x40000008
[ 26.912599] ata3.00: failed command: READ FPDMA QUEUED
[ 26.912610] ata3.00: cmd 60/00:00:97:01:de/01:00:16:00:00/40 tag 0 ncq
131072 in
[ 26.912612] res 41/40:00:1b:02:de/00:00:16:00:00/40 Emask 0x409 (media
error) <F>
[ 26.912617] ata3.00: status: { DRDY ERR }
[ 26.912620] ata3.00: error: { UNC }
[ 26.914637] ata3.00: configured for UDMA/133
[ 26.914647] ata3: EH complete
[ 31.304378] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 31.304382] ata3.00: irq_stat 0x40000008
[ 31.304387] ata3.00: failed command: READ FPDMA QUEUED
[ 31.304398] ata3.00: cmd 60/00:00:97:01:de/01:00:16:00:00/40 tag 0 ncq
131072 in
[ 31.304400] res 41/40:00:17:02:de/00:00:16:00:00/40 Emask 0x409 (media
error) <F>
[ 31.304405] ata3.00: status: { DRDY ERR }
[ 31.304408] ata3.00: error: { UNC }
[ 31.306392] ata3.00: configured for UDMA/133
[ 31.306403] ata3: EH complete
[ 36.174261] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 36.174266] ata3.00: irq_stat 0x40000008
[ 36.174271] ata3.00: failed command: READ FPDMA QUEUED
[ 36.174281] ata3.00: cmd 60/00:00:97:01:de/01:00:16:00:00/40 tag 0 ncq
131072 in
[ 36.174283] res 41/40:00:17:02:de/00:00:16:00:00/40 Emask 0x409 (media
error) <F>
[ 36.174288] ata3.00: status: { DRDY ERR }
[ 36.174291] ata3.00: error: { UNC }
[ 36.176268] ata3.00: configured for UDMA/133
[ 36.176277] ata3: EH complete
[ 41.355458] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 41.355464] ata3.00: irq_stat 0x40000008
[ 41.355469] ata3.00: failed command: READ FPDMA QUEUED
[ 41.355479] ata3.00: cmd 60/00:00:97:01:de/01:00:16:00:00/40 tag 0 ncq
131072 in
[ 41.355481] res 41/40:00:19:02:de/00:00:16:00:00/40 Emask 0x409 (media
error) <F>
[ 41.355486] ata3.00: status: { DRDY ERR }
[ 41.355490] ata3.00: error: { UNC }
[ 41.357477] ata3.00: configured for UDMA/133
[ 41.357497] sd 2:0:0:0: [sda] Unhandled sense code
[ 41.357501] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE [ 41.357507] sd 2:0:0:0: [sda] Sense Key :
Medium Error [current] [descriptor]
[ 41.357514] Descriptor sense data with sense descriptors (in hex):
[ 41.357518] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 41.357536] 16 de 02 19
[ 41.357543] sd 2:0:0:0: [sda] Add. Sense: Unrecovered read error - auto
reallocate failed
[ 41.357553] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 16 de 01 97 00 01 00
00 [ 41.357569] end_request: I/O error, dev sda, sector 383648281
[ 41.357587] ata3: EH complete
[ 41.357600] JBD: Failed to read block at offset 21442
[ 41.357607] JBD: recovery failed
[ 41.357610] EXT3-fs (sda5): error loading journal
[ 46.985205] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 47.087401] ISO 9660 Extensions: RRIP_1991A
[ 47.314063] aufs 2-standalone.tree-35-rcN-20100705
[ 47.395309] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 108.493165] Adding 9100784k swap on /dev/sda6. Priority:-1 extents:1
across:9100784k [ 110.315013] udev[1410]: starting version 163
[ 115.240859] Bluetooth: Core ver 2.15
[ 115.240907] NET: Registered protocol family 31
[ 115.240909] Bluetooth: HCI device and connection manager initialized
[ 115.240912] Bluetooth: HCI socket layer initialized
[ 115.400864] input: Dell WMI hotkeys as /devices/virtual/input/input9
[ 115.474399] shpchp: Standard Hot Plug PCI Controller Driver version:
0.4 [ 115.846271] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[ 115.974945] cfg80211: Calling CRDA to update world regulatory domain
[ 116.110933] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 116.111067] usbcore: registered new interface driver btusb
[ 116.298008] Linux video capture interface: v2.00
[ 116.542495] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps:
0xa04793/0x300000/0x0 [ 116.542500] Synaptics: Clickpad mode enabled
[ 116.542505] serio: Synaptics pass-through port at
isa0060/serio1/input0 [ 116.579672] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input10 [ 117.459036] uvcvideo:
Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
[ 117.459457] uvcvideo: UVC non compliance - GET_DEF(PROBE) not
supported. Enabling workaround.
[ 117.460215] input: Laptop Integrated Webcam as
/devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input11 [
117.460316] usbcore: registered new interface driver uvcvideo
[ 117.460318] USB Video Class driver (v0.1.0)
[ 118.399925] r852 0000:05:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ
18 [ 118.405262] r852: driver loaded succesfully
[ 118.421172] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux,
in-tree: [ 118.421175] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 118.421270] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 118.421298] iwlagn 0000:0c:00.0: setting latency timer to 64
[ 118.421362] iwlagn 0000:0c:00.0: Detected Intel(R) Wireless WiFi Link
4965AGN, REV=0x4
[ 118.464045] iwlagn 0000:0c:00.0: Tunable channels: 11 802.11bg, 13
802.11a channels
[ 118.464194] alloc irq_desc for 46 on node -1
[ 118.464196] alloc kstat_irqs on node -1
[ 118.464236] iwlagn 0000:0c:00.0: irq 46 for MSI/MSI-X
[ 118.976159] cfg80211: World regulatory domain updated:
[ 118.976162] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp) [ 118.976165] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300
mBi, 2000 mBm)
[ 118.976167] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000
mBm) [ 118.976169] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 118.976171] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000
mBm) [ 118.976174] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 119.556883] Bluetooth: L2CAP ver 2.14
[ 119.556886] Bluetooth: L2CAP socket layer initialized
[ 119.559898] alloc irq_desc for 47 on node -1
[ 119.559901] alloc kstat_irqs on node -1
[ 119.559917] tg3 0000:09:00.0: irq 47 for MSI/MSI-X
[ 119.593880] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 120.006330] iwlagn 0000:0c:00.0: loaded firmware version 228.61.2.24
[ 120.995043] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 121.171959] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 121.171962] Bluetooth: BNEP filters: protocol multicast
[ 121.177677] tg3 0000:09:00.0: eth0: Link is up at 100 Mbps, full
duplex [ 121.177679] tg3 0000:09:00.0: eth0: Flow control is on for TX
and on for RX
[ 121.266560] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 121.268338] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 121.714191] Bluetooth: SCO (Voice Link) ver 0.6
[ 121.714194] Bluetooth: SCO socket layer initialized
[ 122.711111] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low)
-> IRQ 21
[ 122.711411] alloc irq_desc for 48 on node -1
[ 122.711413] alloc kstat_irqs on node -1
[ 122.711426] HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 122.711491] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 122.844568] Bluetooth: RFCOMM TTY layer initialized
[ 122.844573] Bluetooth: RFCOMM socket layer initialized
[ 122.844575] Bluetooth: RFCOMM ver 1.11
[ 123.181275] vmap allocation for size 4198400 failed: use
vmalloc=<size> to increase size.
[ 123.181484] vmap allocation for size 2101248 failed: use
vmalloc=<size> to increase size.
[ 123.182171] vmap allocation for size 4198400 failed: use
vmalloc=<size> to increase size.
[ 123.182375] vmap allocation for size 2101248 failed: use
vmalloc=<size> to increase size.
[ 123.183096] vmap allocation for size 4198400 failed: use
vmalloc=<size> to increase size.
[ 123.183302] vmap allocation for size 2101248 failed: use
vmalloc=<size> to increase size.
[ 123.184158] vmap allocation for size 4198400 failed: use
vmalloc=<size> to increase size.
[ 123.184386] vmap allocation for size 2101248 failed: use
vmalloc=<size> to increase size.
[ 123.184486] vmap allocation for size 1052672 failed: use
vmalloc=<size> to increase size.
[ 123.201668] vmap allocation for size 4198400 failed: use
vmalloc=<size> to increase size.
[ 123.336129] input: HDA Intel Mic at Ext Front Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 123.336215]
input: HDA Intel HP Out at Ext Front Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 123.336270]
input: HDA Intel HP Out at Ext Left Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 124.661617] lp:
driver loaded but no devices found
[ 125.344884] ppdev: user-space parallel port driver
[ 132.184040] eth0: no IPv6 routers present
[ 136.336053] [drm] nouveau 0000:03:00.0: Allocating FIFO number 2
[ 136.344462] [drm] nouveau 0000:03:00.0: nouveau_channel_alloc:
initialised FIFO 2
[ 201.105442] [drm] nouveau 0000:03:00.0: nouveau_channel_free: freeing
fifo 2
[ 201.991674] [drm] nouveau 0000:03:00.0: Allocating FIFO number 2
[ 201.999767] [drm] nouveau 0000:03:00.0: nouveau_channel_alloc:
initialised FIFO 2
[ 466.658313] EXT3-fs: barriers not enabled
[ 470.850072] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 470.850080] ata3.00: irq_stat 0x40000008
[ 470.850087] ata3.00: failed command: READ FPDMA QUEUED
[ 470.850098] ata3.00: cmd 60/00:00:df:ee:dd/01:00:16:00:00/40 tag 0 ncq
131072 in
[ 470.850100] res 41/40:00:8b:ef:dd/00:00:16:00:00/40 Emask 0x409 (media
error) <F>
[ 470.850105] ata3.00: status: { DRDY ERR }
[ 470.850108] ata3.00: error: { UNC }
[ 470.852046] ata3.00: configured for UDMA/133
[ 470.852058] ata3: EH complete
[ 479.088848] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 479.088856] ata3.00: irq_stat 0x40000008
[ 479.088868] ata3.00: failed command: READ FPDMA QUEUED
[ 479.088876] ata3.00: cmd 60/00:00:97:01:de/01:00:16:00:00/40 tag 0 ncq
131072 in
[ 479.088877] res 41/40:00:17:02:de/00:00:16:00:00/40 Emask 0x409 (media
error) <F>
[ 479.088881] ata3.00: status: { DRDY ERR }
[ 479.088884] ata3.00: error: { UNC }
[ 479.091013] ata3.00: configured for UDMA/133
[ 479.091038] ata3: EH complete
[ 485.748798] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 485.748805] ata3.00: irq_stat 0x40000008
[ 485.748811] ata3.00: failed command: READ FPDMA QUEUED
[ 485.748822] ata3.00: cmd 60/00:00:97:01:de/01:00:16:00:00/40 tag 0 ncq
131072 in
[ 485.748824] res 41/40:00:19:02:de/00:00:16:00:00/40 Emask 0x409 (media
error) <F>
[ 485.748830] ata3.00: status: { DRDY ERR }
[ 485.748833] ata3.00: error: { UNC }
[ 485.750772] ata3.00: configured for UDMA/133
[ 485.750785] ata3: EH complete
[ 490.196184] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 490.196191] ata3.00: irq_stat 0x40000008
[ 490.196202] ata3.00: failed command: READ FPDMA QUEUED
[ 490.196210] ata3.00: cmd 60/00:00:97:01:de/01:00:16:00:00/40 tag 0 ncq
131072 in
[ 490.196212] res 41/40:00:17:02:de/00:00:16:00:00/40 Emask 0x409 (media
error) <F>
[ 490.196216] ata3.00: status: { DRDY ERR }
[ 490.196219] ata3.00: error: { UNC }
[ 490.198376] ata3.00: configured for UDMA/133
[ 490.198386] ata3: EH complete
[ 494.543476] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 494.543483] ata3.00: irq_stat 0x40000008
[ 494.543489] ata3.00: failed command: READ FPDMA QUEUED
[ 494.543500] ata3.00: cmd 60/00:00:97:01:de/01:00:16:00:00/40 tag 0 ncq
131072 in
[ 494.543502] res 41/40:00:1b:02:de/00:00:16:00:00/40 Emask 0x409 (media
error) <F>
[ 494.543507] ata3.00: status: { DRDY ERR }
[ 494.543511] ata3.00: error: { UNC }
[ 494.545589] ata3.00: configured for UDMA/133
[ 494.545609] ata3: EH complete
[ 498.323767] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 498.323775] ata3.00: irq_stat 0x40000008
[ 498.323787] ata3.00: failed command: READ FPDMA QUEUED
[ 498.323795] ata3.00: cmd 60/00:00:97:01:de/01:00:16:00:00/40 tag 0 ncq
131072 in
[ 498.323796] res 41/40:00:0f:02:de/00:00:16:00:00/40 Emask 0x409 (media
error) <F>
[ 498.323800] ata3.00: status: { DRDY ERR }
[ 498.323803] ata3.00: error: { UNC }
[ 498.325802] ata3.00: configured for UDMA/133
[ 498.325812] ata3: EH complete
[ 501.948385] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
[ 501.948392] ata3.00: irq_stat 0x40000008
[ 501.948399] ata3.00: failed command: READ FPDMA QUEUED
[ 501.948410] ata3.00: cmd 60/00:00:97:01:de/01:00:16:00:00/40 tag 0 ncq
131072 in
[ 501.948412] res 41/40:00:17:02:de/00:00:16:00:00/40 Emask 0x409 (media
error) <F>
[ 501.948417] ata3.00: status: { DRDY ERR }
[ 501.948421] ata3.00: error: { UNC }
[ 501.950527] ata3.00: configured for UDMA/133
[ 501.950550] sd 2:0:0:0: [sda] Unhandled sense code
[ 501.950553] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK
driverbyte=DRIVER_SENSE [ 501.950558] sd 2:0:0:0: [sda] Sense Key :
Medium Error [current] [descriptor]
[ 501.950564] Descriptor sense data with sense descriptors (in hex):
[ 501.950567] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 501.950580] 16 de 02 17
[ 501.950586] sd 2:0:0:0: [sda] Add. Sense: Unrecovered read error -
auto reallocate failed
[ 501.950593] sd 2:0:0:0: [sda] CDB: Read(10): 28 00 16 de 01 97 00 01
00 00
[ 501.950605] end_request: I/O error, dev sda, sector 383648279
[ 501.950621] JBD: Failed to read block at offset 21442
[ 501.950623] ata3: EH complete
[ 501.950630] JBD: recovery failed
[ 501.950633] EXT3-fs (sda5): error loading journal

_______________________________________________ PLUG discussion list:
plug at plug.org.au
http://lists.plug.org.au/mailman/listinfo/plug Committee e-mail:
committee at plug.linux.org.au