[plug] HDD scan

[Jon Miller]

True, but I had a live chat with their technician and there wasn't much he could offer outside of Windows.
Jon

Date: Fri, 17 Jun 2011 08:34:12 +0800
From: michael at hybr.id.au
To: plug at plug.org.au
Subject: Re: [plug] HDD scan

Gnome/Palimpsest Disk Utility is good. I haven't used it for a while but from memory you don't need to unmount the disks to check them.

http://en.wikipedia.org/wiki/Palimpsest_Disk_Utility


On Fri, Jun 17, 2011 at 7:52 AM, Fred Janon <fjanon at yahoo.com> wrote:

Check the Hitachi web site, if I remember correctly their utility works for all drives, except for some proprietary commands. I think they run from a floppy or CD too. Sorry, it has been a long time since I last checked.

Seagate used to have tools that don't require Windows too.

Fred

--- On Fri, 6/17/11, Jon Miller <jonl711 at hotmail.com> wrote:


From: Jon Miller <jonl711 at hotmail.com>

Subject: Re: [plug] HDD scan
To: "Perth Linux User Group" <plug at plug.org.au>
Date: Friday, June 17, 2011, 7:21 AM







The problem is the drive has some errors that prevents it from booting up so I get  GRUB error 17 and upon further investigation found that the drive is reporting: sda: Current: Sense key: Medium error  Additional Sense: Unrecovered read error
  Info fld=0xa2end_request: I/O error, dev sda, sector 162Buffer I/O error on device sda, logical block 81
It's a Seagate ST318406LW 18GB SCSI drive and Seagate does not have any tools that run from Linux only on Windows.  I'm hoping I can find a utility that can check the drive in Linux or from a boot CD and mark the bad blocks.


Regard,

JonDate: Thu, 16 Jun 2011 17:39:20 +0800
From: james at rcpt.to
To: plug at plug.org.au

CC: jlmiller at mmtnetworks.com.au
Subject: Re: [plug] HDD scan


  
 
 
    
  
  
    On 16/06/2011 4:36 PM, Jon L Miller wrote:
    
      
      
      
      
        Can anyone
              recommend a good hdd scanning software to check
              for hard drive conditions, while server is up?
      
    
    

    I'd suggest smartmontools as a start:

    

    Description: control and monitor storage systems using
      S.M.A.R.T.

       The smartmontools package contains two utility programs (smartctl
      and smartd)

       to control and monitor storage systems using the Self-Monitoring,
      Analysis and

       Reporting Technology System (S.M.A.R.T.) built into most modern
      ATA and SCSI

       hard disks. It is derived from the smartsuite package, and
      includes support

       for ATA/ATAPI-5 disks. It should run on any modern Linux system.

    
    

    

    

    -- 

      Mobile: +61 422 166 708, Email:
      james_AT_rcpt.to

      PLUG President 2011: http//www.plug.org.au

      Perth.pm Organiser 2011: http://perth.pm.org
  


_______________________________________________
PLUG discussion list: plug at plug.org.au
http://lists.plug.org.au/mailman/listinfo/plug
Committee e-mail: committee at plug.linux.org.au 		 	   		   

-----Inline Attachment Follows-----

_______________________________________________
PLUG discussion list: plug at plug.org.au

http://lists.plug.org.au/mailman/listinfo/plug
Committee e-mail: committee at plug.linux.org.au


_______________________________________________

PLUG discussion list: plug at plug.org.au

http://lists.plug.org.au/mailman/listinfo/plug

Committee e-mail: committee at plug.linux.org.au





_______________________________________________
PLUG discussion list: plug at plug.org.au
http://lists.plug.org.au/mailman/listinfo/plug
Committee e-mail: committee at plug.linux.org.au 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.plug.org.au/pipermail/plug/attachments/20110617/ed7e4665/attachment.html>