[plug] IP Routing Problem on Linux Box

[Colin 't Hart]

Richard Mortimer wrote:

<snip>

> We are trying to add some PC's and various devices on our network under a
> 10.1.x.x, but when adding:
> 
> route add -net 10.1.0.0 netmask 255.255.0.0 gw 203.20.99.99

<snip>

> Bastion:
> >lo        Link encap:Local Loopback
> >          inet addr:127.0.0.1  Bcast:127.255.255.255  Mask:255.0.0.0
> >          UP BROADCAST LOOPBACK RUNNING  MTU:3584  Metric:1
> >          RX packets:0 errors:0 dropped:0 overruns:0
> >          TX packets:0 errors:0 dropped:0 overruns:0
> >
> >eth0      Link encap:10Mbps Ethernet  HWaddr 00:60:97:03:60:A0
> >          inet addr:203.20.82.9  Bcast:203.20.82.255  Mask:255.255.255.0
> >          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >          RX packets:251181 errors:0 dropped:0 overruns:0
> >          TX packets:140214 errors:0 dropped:0 overruns:0
> >          Interrupt:5 Base address:0x280
> >
> >eth1      Link encap:10Mbps Ethernet  HWaddr 00:60:97:03:6A:3F
> >          inet addr:203.20.82.9  Bcast:203.20.82.255  Mask:255.255.255.0
> >          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> >          RX packets:28754 errors:0 dropped:0 overruns:0
> >          TX packets:246792 errors:0 dropped:0 overruns:0
> >          Interrupt:10 Base address:0x300

Ummm ... both ethernet interfaces in Bastion are 203.20.82.9??
Surely one of these should be 10.1.xx.xx??

Colin