[plug] Multiple IP's on one ethX ...

[Nathan Alberti]

Yes..
Set them up (assuming Redhat) /etc/sysconfig/network-scripts/ifcfg-***

*** = eth0:0 or eth0:1 

just copy the eth0 file and edit the information within.

you should bw able to bring them up with ifup (interface name) and
ifdown (interface name)

hope this helps.



Trevor Phillips wrote:
> 
> Is it possible with Linux to have two IP addresses bound to one Ethernet card,
> a-la Solaris?? With Solaris you can configure one card (le0) to have additional
> interfaces (le0:1, le0:2, etc ...). Can this be done with Linux??
> 
> I'm rummaging thru all the Networking Howto's, but haven't found anything
> yet...
> 
> --
> . Trevor Phillips             -           http://jurai.murdoch.edu.au/ .
> : CWIS Technical Officer         -           T.Phillips at murdoch.edu.au :
> | IT Services                       -               Murdoch University |
>  >------------------- Member of the #SAS# & #CFC# --------------------<
> | On nights such as this, evil deeds are done. And good deeds, of     /
> | course. But mostly evil, on the whole.                             /
>  \      -- (Terry Pratchett, Wyrd Sisters)                          /

-- 
Nathan Alberti - Ackroyd
(Network Operations Engineer)
---------------------
PARADOX DIGITAL P/L ACN 008875714 
---------------------
9 Scarborough Beach Road
North Perth  6006
Western Australia
+61 (08) 9201 9201 Phone
+61 (08) 9201 9200 Fax
--------------------
24 Hour Support
--------------------
 1800 248 002