[plug] RH 6 upgrade kills X

Sat Jul 17 16:12:30 WST 1999

Upgrading to redhat 6.0 (off a Everything Linux bleeding edge CD so the
errata is up to date as of 12/7) has resulted in a dead X... well not
quite dead, X itself seems to start ok (it gets to the grey hatched
background with an X cursor) but hangs before any window managers start. A
dump of the output from startx (below) has some errors that I'm unable to
find any references to (at least ones for that make any difference) other
than for the suggestion to re run xf86config due to the
_X11TransSocketUNIXConnect:  error (which I did but...). I've verified the
rpm's and things appear ok there as well as re compiling the kernal ( well
I needed to do that anyway :). 

I've about run out of ideas so anything helpful would be appreciated

_XSERVTransSocketUNIXCreateListener: mkdir(/tmp/.X11-unix) failed, errno =
17 _XSERVTransMakeAllCOTSServerListeners: failed to create listener for
local

XFree86 Version 3.3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 4 1999
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.5-15smp i686 [ELF] 
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 0):
      NV1, STG2000, RIVA128, RIVATNT, ET4000, ET4000W32, ET4000W32i,
      ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
      ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000,
ET6100,
      et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
      gvga, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225,
      sis5597, sis5598, sis6326, tvga8200lx, tvga8800cs, tvga8900b,
      tvga8900c, tvga8900cl, tvga8900d
_X11TransSocketUNIXConnect: Can't connect: errno = 111

waiting for X server to begin accepting connections , tvga9000, tvga9000i,
tvga9100b,
      tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
      tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685,
      cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, 3dimage975,
      3dimage985, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428,
      clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480,
clgd5462,
      clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235,
clgd7541,
      clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22,
ncr77c22e,
      cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200,
      mgag100, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301,
      ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7,
      ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, s3_virge,
      AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160,
      NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
ct65546,
      ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
      ct64300, mediagx, V1000, V2x00, p9100, spc8110, generic (using VT
number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values (**) XKB:
keymap: "xfree86(en_US)" (overrides other XKB settings) (**) Mouse: type:
MouseSystems, device: /dev/mouse, baudrate: 1200 (**) Mouse: buttons: 3, 3
button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "3"
(**) SVGA: Monitor ID: "My Monitor"
(--) SVGA: Mode "640x400" needs hsync freq of 37.86 kHz. Deleted. (--)
SVGA: Mode "640x480" needs hsync freq of 36.46 kHz. Deleted. (--) SVGA:
Mode "640x480" needs hsync freq of 37.50 kHz. Deleted. (--) SVGA: Mode
"800x600" needs hsync freq of 37.88 kHz. Deleted. (--) SVGA: Mode
"640x480" needs hsync freq of 43.27 kHz. Deleted. (--) SVGA: Mode
"1152x864" needs hsync freq of 43.92 kHz. Deleted. (--) SVGA: Mode
"800x600" needs hsync freq of 48.08 kHz. Deleted. (--) SVGA: Mode
"1024x768" needs hsync freq of 48.36 kHz. Deleted. (--) SVGA: Mode
"640x480" needs hsync freq of 53.01 kHz. Deleted. (--) SVGA: Mode
"1152x864" needs hsync freq of 53.51 kHz. Deleted. (--) SVGA: Mode
"800x600" needs hsync freq of 55.84 kHz. Deleted. (--) SVGA: Mode
"1024x768" needs hsync freq of 56.48 kHz. Deleted. (--) SVGA: Mode
"1280x1024" needs hsync freq of 51.02 kHz. Deleted. (--) SVGA: Mode
"800x600" needs hsync freq of 64.02 kHz. Deleted. (--) SVGA: Mode
"1024x768" needs hsync freq of 62.50 kHz. Deleted. (--) SVGA: Mode
"1152x864" needs hsync freq of 62.42 kHz. Deleted. (--) SVGA: Mode
"1280x1024" needs hsync freq of 64.25 kHz. Deleted. (--) SVGA: Mode
"1024x768" needs hsync freq of 70.24 kHz. Deleted. (--) SVGA: Mode
"1152x864" needs hsync freq of 70.88 kHz. Deleted. (--) SVGA: Mode
"1280x1024" needs hsync freq of 74.59 kHz. Deleted. (--) SVGA: Mode
"1600x1200" needs hsync freq of 75.00 kHz. Deleted. (--) SVGA: Mode
"1152x864" needs hsync freq of 76.01 kHz. Deleted. (--) SVGA: Mode
"1280x1024" needs hsync freq of 78.86 kHz. Deleted. (--) SVGA: Mode
"1024x768" needs hsync freq of 80.21 kHz. Deleted. (--) SVGA: Mode
"1280x1024" needs hsync freq of 81.13 kHz. Deleted. (--) SVGA: Mode
"1600x1200" needs hsync freq of 87.50 kHz. Deleted. (--) SVGA: Mode
"1152x864" needs hsync freq of 89.62 kHz. Deleted. (--) SVGA: Mode
"1280x1024" needs hsync freq of 91.15 kHz. Deleted. (--) SVGA: Mode
"1600x1200" needs hsync freq of 93.75 kHz. Deleted. (--) SVGA: Mode
"1600x1200" needs hsync freq of 105.77 kHz. Deleted. (--) SVGA: Mode
"1280x1024" needs hsync freq of 107.16 kHz. Deleted. (--) SVGA: Mode
"1800X1440" needs hsync freq of 96.15 kHz. Deleted. (--) SVGA: Mode
"1800X1440" needs hsync freq of 104.52 kHz. Deleted. (--) SVGA: Mode
"320x240" needs hsync freq of 39.38 kHz. Deleted. (--) SVGA: Mode
"400x300" needs hsync freq of 37.88 kHz. Deleted. (--) SVGA: Mode
"400x300" needs hsync freq of 48.08 kHz. Deleted. (--) SVGA: Mode
"480x300" needs hsync freq of 37.80 kHz. Deleted. (--) SVGA: Mode
"480x300" needs hsync freq of 39.56 kHz. Deleted. (--) SVGA: Mode
"480x300" needs hsync freq of 48.00 kHz. Deleted. (**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/"
(--) SVGA: PCI: Trident TGUI 96xx rev 211, Memory @ 0xff400000, MMIO @
0xffbe0000 (--) Trident chipset version: 0xd3 (TGUI96xx)
(--) SVGA: BIOS reports Clock Control Bits 0x0
(--) SVGA: Detected a Trident 9680.
(--) SVGA: Revision 1.
(--) SVGA: Using Trident programmable clocks
(--) SVGA: chipset:  tgui9680
(--) SVGA: videoram: 2048k
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 135.000 MHz
(**) SVGA: Mode "800x600": mode clock =  36.000
(**) SVGA: Mode "640x480": mode clock =  25.175
(--) SVGA: Virtual resolution set to 800x600
(--) SVGA: Using Linear Frame Buffer at 0x0ff400000, Size 2MB (--) SVGA:
Using Graphics Engine.
(--) SVGA: Using 1024 byte display width.
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 pattern fill
(--) SVGA: XAA: CPU to screen color expansion (bitmap, TE/NonTE imagetext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: General lines and segments
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm
-m en_US -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> "
-eml "Errors from xkbcomp are not fatal to the X server" keymap/xfree86
compiled/xfree86.xkm' .
_X11TransSocketUNIXConnect: Can't connect: errno = 111
..
_X11TransSocketUNIXConnect: Can't connect: errno = 111
..
_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.
xinit:  Connection refused (errno 111):  unexpected signal 2

-- 
/-- Bob Ogden  bob at contact.omen.com.au --------------/
/  -... --- -...   --- --. -.. . -.       Finger  for PGP key -----/

Does your system break in 167 days?