[plug] scsi setup red hat

[alex polglaze]

Ron,

Thanks for the quick reply.

I tried entering the information instead of accepting the autoprobe, but
nothing happened. The system would not pass the screen. How exactly did
you get it to accept this information?

Appreciate your reply.

Alex Polglaze

Vanderkley, Ron RW wrote:
> 
> Alex,
> 
> In the SCSI-documentation there is a note regarding using the earlier
> adaptec scsi cards
> You may have to tell the system the SCSI-id,IRQ, etc, instead of the auto
> probe, as I have gone thru the same problem with a
> 1510 card...
> 
> Ron Vanderkley
> 
> PDS SUPERVISOR
> B
> BHP Engineering Pty Ltd
> 221 St George's Terrace Perth 6000, Western Australia.
> Phone: 61-8-94265966
> Fax:      61-8-94265930
> 
> > ----------
> > From:         alex polglaze[SMTP:apolglaze at book-keepingnetwork.com.au]
> > Reply To:     plug at linux.org.au
> > Sent:         Tuesday, 2 March 1999 8:00
> > To:   plug at linux.org.au
> > Subject:      [plug] scsi setup red hat
> >
> > I am just starting on linux and have red hat 5.2, a 486 machine and an
> > adaptec 1505 scsi controller. I can't get past the initial setup because
> > adaptec controlers start at 152x.
> >
> > Can anybody help me please?
> >
> > Alex Polglaze
> >