[plug] APC Redhat 5.2 PPP connections

[Mim Morcom]

That is exactly what I did, and it came up with the error regarding the
dir's not found,ie


    X11/Xlib.h
    X11/Xutils.h
    X11/Xatom.h
    X11/keysym.h
    X11/Xresource.h
    X11/cursorfont.h

It then says: make: *** [xisp.o] Error 1
 there is obviously a package I have missed, but what ?

Thanks

-----Original Message-----
From: Tony Clark <tony at ballist.net.au>
To: plug at linux.org.au <plug at linux.org.au>
Date: Sunday, 21 March 1999 12:44
Subject: [plug] APC Redhat 5.2 PPP connections


>After a few messages in here I took a look at the APC Pocket book to see
why it
>seemed to be causing so many problems for people to get ppp up and running
>with their ISP.
>
>The basic intructions for using the control tool seem ok..They warn you off
it
>and get you to use xisp.  This is where there are some problems with the
>instructions.
>
>The following I hope will clear this up a little.
>
>cd /tmp
>tar -zxvf /mnt/cdrom/APC/SRC/bxform-088-glibc.tar.gz
>tar -zxvf /mnt/cdrom/APC/SRC/xisp-2_5p4.tar.gz
>cd xforms
>make install
>cd ../xisp-2.5p4
>vi Makefile
>comment all lines that relate to slackware!
>The Redhat section should look the same as below
>
># # Red Hat vars (use the lines defining -lcrypt in EXTRALIBS
># and -DGLIBC2 in EXTRADEFS for version >= 5.0). Reportedly,
># the following is also good for SuSE Linux 5.x distributions
>#-------------------------------------------------------------
>BINX11    = usr/X11R6/bin
>USRLOCAL  = usr/bin
>SBINDIR   = usr/sbin
>VARRUN    = var/run
>USRLIBPPP = $(SBINDIR)
>OPTSDIR   = etc/ppp
>MANDIR    = usr/man/man1
>ETCPPP    = etc/ppp
>DESTDIR   = $(RPM_BUILD_ROOT)
>GROUP     = root
>GCCFLAGS  = $(RPM_OPT_FLAGS)
>EXTRADEFS = -DGLIBC2
>#EXTRADEFS =
>EXTRALIBS = -lcrypt
>#EXTRALIBS =
>INSTALL   = install
>#
>
>save the Makefile
>
>make
>
>If there are no errors
>
>make install
>
>xisp should then work correctly.
>
>Have fun
>
>Tony
>