[plug] Routing

Garth Atkinson garth at cclinic.com.au
Sat Aug 19 17:14:33 WST 2000


Hi Kevin

Do a cat of /proc/sys/net/ipv4/ip_forward and confirm it contains a
"1".

Garth

"Shackleton, Kevin" wrote:
> 
> I sound a little thick here - but I can't seem to get a box to route.
> 
> Running RH6.2, I've set the /etc/sysconfig/networks FORWARD_IP4 to YES and I
> have two working cards, eth0 and eth1.  The routing table has automatically
> added the two routes which are "U"p, not "UH".  I've restarted the network.
> Yet no traffic is passing from one network to other, either way.  I've done
> "route add"s to other hosts, and these hosts can ping the further routing
> card address.  tcpdump running on both interfaces shows no traffic getting
> through.  What have I overlooked or done wrong? (The two networks are Class
> B - not 192.168...)
> 
> K.



More information about the plug mailing list