[plug] EQL

[Shane Spina]

----- Original Message -----
From: The Thought Assassin <assassin at live.wasp.net.au>
To: Plug <plug at plug.linux.org.au>
Sent: Tuesday, December 26, 2000 3:52 PM
Subject: Re: [plug] EQL


> On Tue, 26 Dec 2000, Shane Spina wrote:
> > I am trying to configure EQL on a Debian 2.2 box.  I have installed it
> > into the kernel and the second modem dials out and handshakes but i get
> > a error saying : sent 165 bytes recieved 172 bytes ...
> That doesn't sound like an error message... is that the whole message?

that is from the messages log.. it starts ppp .. connection terminated ...
sent 165 bytes recieved 172 bytes

on the ISP side the errors are :

IPCP teminated by peer(unathorised remote IP address)
LCP terminated by peer(no network protocols running)



>
> > I was of the understanding that configuration of EQL was only on the
> > dial out side of the connection..
> You will need to install and configure eql on both sides for optimal
> results. IIRC, you will get connection-grained load-balancing this way,
> but need EQL on the upstream source to get packet-sized granularity.
>
> > and from what i have read there seems to be no config required of eql
> > other than installation into the kernel..
> Do you not still need to run eql_enslave or the current equivalent?

yep have done this.. eql is running on both machines..
>
> -Greg Mildenhall
>
>
>