[plug] Can't use AHA-1520B SCSI adapter

[McMeikan, Andrew]

I use the aha152x driver at home on a suse box with a 1542 (i think) card.
I have to explicitly tell the module the base address of the card.  Apart
from that it works a treat.

	cya,	Andrew...

> -----Original Message-----
> From:	Steve Baker [SMTP:sbaker at icg.net.au]
> Sent:	Monday, February 28, 2000 6:25 AM
> To:	PLUG
> Subject:	[plug] Can't use AHA-1520B SCSI adapter
> 
> People,
> 
> I have an Adaptec AHA-1520B ISA SCSI adapter, but when I try to load the
> aha152x module I get the message 'init_module: Device or resource busy'.
> As
> far as I can tell there are no IRQ, I/O port, DMA or memory conflicts.
> 
> Is this card actually supported?  I checked the sources, and there is no
> explicit mention of the 'B' revision of this card.  The card itself is
> working OK, if I go into the BIOS utility at boot time I can see the
> scanner
> that is attached to the card.  Is anyone using one of these?
> 
> Thanks.
> Steve
> --
> Steve Baker sbaker at icg.net.au - Integra Consulting Group
> http://www.icg.net.au
> Open your mind, then look at http://www.nexusmagazine.com
>