[plug] Gateway

[Shane Spina]

----- Original Message -----
From: Matt Kemner <zombie at wasp.net.au>
To: <plug at plug.linux.org.au>
Sent: Wednesday, November 29, 2000 1:51 PM
Subject: Re: [plug] Gateway


> On Wed, 29 Nov 2000, Shane Spina wrote:
>
> > > Did you quit out of minicom (without dropping the link - <ctrl-a><Q>)
and
> > > then tell the local pppd to talk to the serial port? (pppd /dev/ttySn)
> >
> > yes i tried that.. no dice
>
> What does it do?
>
> Does it start spitting out garbage (in which case you didn't specify the
> serial port) or does it return to the prompt?  In the latter case what
> does it say in the logs?
>

same error mesg.. serial link is not 8 bit clean.. this is from minicom .. i
also noticed something else LCP: timeout eoor sending Config-Request

> > i have this in my dialmodemchat script
> >
> > ""
> > ATZ
> > OK
> > ATDT95291599
> > CONNECT
> > ""
> > ogin:
> > <username>
> > word:
> > <pass>
> > $
> > /usr/sbin/pppd
>
> If you modify DialModem so it runs "chat -v -f <chatscript>" rather than
> "chat -f <chatscript" it should output what it's doing to syslog so you'll
> be able to see why it's failing.
>
> My guess (as I've already told you on the phone) is that you probably need
> to change the "$" to something else.

changed that too.. have put shane at dialup:~
which is what my prompt from minicom is...


>
>  - Matt
>
>
>