[plug] Schematic
alan howard
alanh at wn.com.au
Mon Oct 9 18:15:42 WST 2000
On Mon, 09 Oct 2000, Garry wrote:
> Would anyone have a schematic diagram of the CDROM drive for Toshiba laptop
> model CDS220?
>
> The model number on the drive is XM-1502B N
>
> Mine is refusing to recognise that there is a disk present in the drive.
>
> Or if anyone has a working drive, and would rather have a carton of cans... Not
> fussy if the model number of the drive is different, so long as it works in my
> machine!
a few questions that may help.
does the drive go back to the home position ( nearest the spin motor), and does
the laser initialize, ie does the monitor LED come on , and a focus search
start. if not the fault could be in the control logic or the motor/
focus-tracking coil drive . if it does a focus search try positioning a mirror
above the laser lense and see if the spin motor starts. if it fails to start
locate the rf amp/ servo ic and see if you can find any data on it. it should
have a focus OK ( FOK) pin that should change state when a reflection is
detected. If it doesnt change state it is usually the laser , but can also be
the ic.
regards
alan howard
More information about the plug
mailing list