[plug] Dumb question

[Brad Campbell]

G'day all..
I have a problem that is frustrating me. I have looked in all the 
obvoius places, and whats more frustrating, is that 2 years ago I made
this work, and I can't make it work now.

I have 2 networks. 192.168.0.x and 192.168.1.x
I have a linux box with 2 tulip cards in it.
Eth0 is 192.168.0.100 and Eth1 is 192.168.1.100
I have a default route to eth0 and a standard route to eth1
I have ip forwarding enabled.
The only way I can ping anything on eth0 from anything on eth1 is
to enable masq with an ipchains rule.

Here is the relevant info.

>From this box I can ping anything from anywhere. But from 192.168.1.2 I can't
ping 192.168.0.1 unless I have the below masq rule in place..
My input and output rules are default accept, flushed.

Chain forward (policy ACCEPT):
target     prot opt     source                destination           ports
MASQ       all  ------  192.168.1.0/24       0.0.0.0/0             n/a

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth1
192.168.0.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0
0.0.0.0         192.168.0.1     0.0.0.0         UG    1      0        0 eth0


Anything else that would help?

While I'm here, how can I copy from an xterm into the clipboard to paste into
netscape ?

Xterm to Xterm is easy. I have GPM loaded and I just highlight and middle click
to paste, but I can't get it into netsacpe


-- 
Brad....
                   /"\
Save the Forests   \ /     ASCII RIBBON CAMPAIGN
Burn a Greenie.     X      AGAINST HTML MAIL
                   / \