[plug] scsi problem

[Russell Hobman]

Goodaye, have you tried disconnecting one of the Conner drives. I read
somewhere that Conner drives are not compatible with each other. not sure
what model this applies to? ie you can have two drives in a PC as long as
they are not both Connors. cheers, Russell.

> -----Original Message-----
> From:	Darren [SMTP:dylnx at iinet.net.au]
> Sent:	Saturday, November 03, 2001 10:17 PM
> To:	plug at plug.linux.org.au
> Subject:	[plug] scsi problem
> 
> Hello  Im having a problem installing a scsi card and a couple of hard
> drives.the card is a buslogic bt-542b and the drives are conner cfa540s
> the system has a pri master ide drive and a sec slave ide cdrom.once the
> card and drives are connected the system boots ok detecting the ide
> drives as normal.the scsi starts its boot process it detects both conner
> drives and assigns 0 and 1  to these drives it then displays bios
> installed successfully and the system hangs i have tried with another
> scsi card and it does the same.any help would be appreciated Thanks
> Darren
> 
>