[plug] scsi problem

Darren dylnx at iinet.net.au
Wed Nov 21 00:24:38 WST 2001


hello russell no i didnt try that ,but i have already sorted the problem
out i upgraded the bios and it worked straight away .the drives are up
and running in a system running Mandrake SNF thanks Darren
 
On Tue, 2001-11-20 at 13:28, Russell Hobman wrote:
> Goodaye, have you tried disconnecting one of the Conner drives. I read
> somewhere that Conner drives are not compatible with each other. not sure
> what model this applies to? ie you can have two drives in a PC as long as
> they are not both Connors. cheers, Russell.
> 
> > -----Original Message-----
> > From:	Darren [SMTP:dylnx at iinet.net.au]
> > Sent:	Saturday, November 03, 2001 10:17 PM
> > To:	plug at plug.linux.org.au
> > Subject:	[plug] scsi problem
> > 
> > Hello  Im having a problem installing a scsi card and a couple of hard
> > drives.the card is a buslogic bt-542b and the drives are conner cfa540s
> > the system has a pri master ide drive and a sec slave ide cdrom.once the
> > card and drives are connected the system boots ok detecting the ide
> > drives as normal.the scsi starts its boot process it detects both conner
> > drives and assigns 0 and 1  to these drives it then displays bios
> > installed successfully and the system hangs i have tried with another
> > scsi card and it does the same.any help would be appreciated Thanks
> > Darren
> > 
> > 
> 
> 




More information about the plug mailing list