[plug] re: server freezing

[Jon Miller]

No screensaver installed, this unit runs at level 3 only.  I've turned off the powersaving feature and screen blanking features.
So far day 2 it has not locked up, but again I have a ssh session on.

Jon

Jon L. Miller, MCNE, CNS
Director/Sr Systems Consultant
MMT Networks Pty Ltd
http://www.mmtnetworks.com.au

"I don't know the key to success, but the key to failure
 is trying to please everybody." -Bill Cosby



>>> harrymc at decisions-and-designs.com.au 9:56:51 AM 9/07/2003 >>>
On Tue, 8 Jul 2003 23:23:02 +0800 Bernard Blackham
<bernard at blackham.com.au> wrote:

> On Tue, Jul 08, 2003 at 06:36:31PM +0800, Jon  Miller wrote:
> > from a workstation in the office and left that connected.  The
> > server has not locked.  I will leave it for another 24 hrs to see
> > if locking occurs.
> 
> Leave top running with an update speed of 0 (continuously) - either
> from the ssh session or on the console, in case a particular process
> is causing the hassle and you just might catch it :)
> 
> Have you done anything like enabling DMA or similar recently?

I haven't been following this thread (and so it may have been mentioned)
but there was an issue like this where a bad 3d module and a 3d screen
saver enabled and froze systems. If you have have X on the server, and
someone has made the screensaver "gah way" by setting it to "screensave in
a day" then it would explain the symptom. Or you've been feverishly
observing the box and then turned your back for five minutes ..

I know, I know, it's a longer than long shot ..

cu
Harry

-- 
linux.conf.au 2004		The Australian Linux Technical Conference
http://lca2004.linux.org.au/	12-17 January 2004, Adelaide, South Australia

Are you a computer angel?	http://www.computerangels.org.au/