[plug] Nvidia display mapping swap

[Mungo TheB]

have twin monitor setup 0 1 (crt, crt)
when nvidia boots into x display comes up 1 0

tracked it to
(--) NVIDIA(0): Found 2 CRTCs on board
(II) NVIDIA(0): Supported display device(s): CRT-0, CRT-1, DFP-0, TV-0
(II) NVIDIA(0): Boot display device(s): CRT-0, CRT-1
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 Ti 4600
(II) NVIDIA(0): Chip Architecture: 0x20
(II) NVIDIA(0): Chip Implementation: 0x25
(II) NVIDIA(0): Chip Revision: 0xa3
(--) NVIDIA(0): VideoBIOS: 04.25.00.30.00
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-0, CRT-1
(--) NVIDIA(0): Detected TV Encoder: Philips 7108
(II) NVIDIA(0): Enabled display device(s): CRT-0, CRT-1
(II) NVIDIA(0): Mapping display device 0 (CRT-0) to CRTC 1
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at  8 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 350 MHz
(II) NVIDIA(0): Mapping display device 1 (CRT-1) to CRTC 0
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at  8 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-1: maximum pixel clock at 32 bpp: 350 MHz

anyone know why or how to stop the swapping?
NO! I dont want to swap the monitors or cables around. (for various reasons, 
I know I can do that)

if twinview is NOT enabled, can still see 2 monitors connected and STILL 
swaps

as a side note for those frustrated with nvidia.
2 bigest hudles to sorting most of the problems out are
   VideoBios and dpms

thanks
MungoTheB

_________________________________________________________________
ninemsn Premium transforms your e-mail with colours, photos and animated 
text. Click here  http://ninemsn.com.au/premium/landing.asp