[plug] Knoppix with nForce2 Motherboard

[Cameron Patrick]

On Wed, Sep 24, 2003 at 10:28:55PM +0800, Bernard Blackham wrote:
| On Wed, Sep 24, 2003 at 10:09:27PM +0800, Daniel Pearson wrote:
| > I can't seem to get to any sites currently with documentation on this. It
| > detected the sound card fine, but couldn't see the NIC at all.. anyone had
| > experience with such?
| 
| Quite probably you'll need the nvnet driver - downloadable from
| nVidia's website. Last I tried, it compiles against your current
| kernel source (or just kernel headers) and creates an nvnet.o
| module (only for 2.4.x)

Alternatively you could do what I did and stick a generic NIC into it
and use that instead :-P  Saves headaches that way.  Also, if you
compile your own kernel, /don't/ enable local APIC support as on many
nforce2 boards (including mine) this will leave you with a hideously
unstable system.

Cheers,

Cameron.

_______________________________________________
plug mailing list
plug at plug.linux.org.au
http://mail.plug.linux.org.au/cgi-bin/mailman/listinfo/plug